Blink Live View Failed Troubleshooting Guide

Blink security cameras are one of the best security devices on the market. With the new latest features, you can easily monitor the footage from anywhere. Receiving alerts on the smartphone is one of the amazing features. But something, the Blink Live View Failed because of one or other reasons.

If your Blink Live View Failed, check the connectivity and the power outage. It could be possible that the battery of the Blink camera is discharged completely.

We would like to suggest you use the AA Lithium batteries. If you are using them, they should be completely charged.

We are going to tell you a few simple troubleshooting steps to fix the error. Moving ahead, let’s see how to fix when the live view fails on the Blink camera.

Troubleshooting Tips For Blink Live View Failed

There are a number of reasons why Blink Live View Failed completely. There are a number of Blink cameras that come along with LED indicator lights. This LED light will let you know if there is any recording issue. 

LED Indicator Light Issue

• When you turn ON the Blink security camera for the first time, you will see a red LED light which means you are setting up wireless connectivity.

• You will see Blink Camera Red Light on the right side of the camera when you will insert new batteries.

• When the Blink batteries of the Blink camera fails, the LED light will flash 5-6 times.

• When the Blink camera will start detecting motion, you will see a brief red flashlight.

• If your Blink security camera is active and recording continuously, you will see solid blue LED light.

• The solid red light on the camera indicates the connection problem.

Hence, it is very necessary to check the LED light on your Blink camera if the Blink Live View Failed completely.

Low Power Batteries

If you are worried because of Blink Sync Module Red Light, low-power batteries could be an issue. Hence, you will have to replace the batteries with new ones.

We recommend you to use only AA Lithium batteries in the Blink security camera for a better understanding.

Poor Wifi Connection

A high-speed internet connection is very much necessary for the proper working of a Blink security camera. So, do check your internet connection, if found anything wrong then do contact your network service providers.

It might be possible that you have placed the base station far from the router. Hence, Blink Live View Failed completely.

Reset Blink Camera

Resetting a Blink security camera is quite a normal task. You just have to press the reset button in order to troubleshoot the devices. The reset button is given under the cover on the back. In different Blink cameras, the reset button is given on different sides.

1. With the help of a paperclip, press and hold the button for about 10 seconds.

2. Notice the LED light behavior, the light will be changed to blinking red to indicate that the camera has been reset completely.

Reset Sync Module

If the Blink Camera Sync Module Offline, resetting the device is another option to fix the error. Follow these given steps to fix the issue completely.

1. Find and press the reset button on the Blink security camera.

2. Take your finger off when the Blink camera flashes a red light.

3. You have reset the Sync module successfully. So, connect the camera to the module now.

Summary

Connectivity issues occur in the Blink security camera from time to time. If your Blink Live View Failed, we have mentioned all the troubleshooting steps in this guide.