Quick Guide To Setup A Netgear Router Using The Router Web Interface

Netgear is an American computer networking multinational company based out of San Jose, California, they manufacture computer network product for both home and office uses. The product includes a wired and wireless device, modem, network switch, router, and other network connectivity types of equipment but like every other technical device, it also has some technical issues that create router to function normally. In such a situation contact Netgear router support phone number and get the best solutions for our technical experts.

This article will help you configure your Netgear router device using the router web interface with the help of an ethernet cable/broadband internet connection.

To configure your router for cable internet connection with the Netgear User interface:

• First of all, you need to Unplug the modem and the router power cords.

Note - If your modem is connected to the back-up battery, temporarily remove it.

• With the help of an ethernet cable connect the modem to the internet port of the router.

• Connect your computer to one of the LAN ports of the router with the help of an ethernet cable.

• If your modem is connected to any back-up battery re-connect it and also reconnect the modem power.

• Wait until all the lights become stable.

• Reconnect the router to the power and wait for all the power lights to become soil green.

• Open a web browser and in the URL field type the IP address of the router (default IP address is http://192.168.0.1 or http://192.168.1.1) and press the enter button.

• Enter the user name and the password of your device and click on the login button.

Note- The default user name is 'admin' and the default password is 'password' but if the default credentials do not work that means you might have changed the username and password. if you do not remember the credentials you need to perform the factory reset to restore the router to the default/factory settings.

• On the user, interface click on the advance setting and then select Setup Wizard.

• Now you need to select yes and then click Next.

Note- By this Setup Wizard will now detect the internet connection type. it will take a few minutes to complete the process.

• once the setup will complete the configuring the internet connection, the configuration page will displays.

• Click on Take me to the Internet to test the connection.

Once you complete the configuration make sure that you are connected to the internet, after following the steps if you are not connected to the internet then you need to contact the router support number and ask them for the proper steps and guidance to set up the router.

Netgear router support phone number | +(1)-888-846-5560 Toll-Free

Netgear router support phone number is a technical support team available 24x7 to provide you with solutions to resolve your error. To avail, the support Call Us Toll-Free: USA: +(1)-888-846-5560. You can also use the email chat and live chat support service to resolve the error steps by steps.