How to Set Up a Canon IP100 Printer For the First Time?

by Henry Max The Global Blogs

Features like max B/W resolution of 600 x 600 dpi, the droplet size of 1 pl, photo print speed of 50 sec (4"x 6"), and many more powers like these make Canon IP100 Printer among the tip-selling printers. If you have got one and are looking for a guide to setup, you are at the right place! Let's start with the wireless setup.

Steps for Canon IP100 Wireless Printer Setup

Follow these quick and easy steps mentioned below to do the Canon IP100 wireless printer setup.

Turn ON your Printer
Press the Wi-Fi button available on the printer's top until the white power LED starts flashing
The blue Wi-Fi LED on the printer and the white LED will keep flashing until the printer gets connected to an access point

After doing the wireless setup, you will now have to download the printer's software or driver. For Canon IP100 printer driver download, visit the official Canon site and download it.

How to connect the Canon IP100 printer to the computer via Bluetooth?

To do the Canon IP100 Bluetooth installation and setup for windows, follow the tips given below:

1. Turn off your printer.

2. From the AC adaptor connector's side, remove the side panel.

3. Insert the Bluetooth unit.

4. Attach the side panel back to the printer.

5. Turn ON your printer, register the printer as a Bluetooth device.

After doing the setups mentioned above, try to take a test print. While doing this, if you notice that the paper is jammed in your printer and you want to know how to resolve my Canon IP100 paper jam issue, then, open the lid of your printer and take out the jammed paper and every torn piece. Cover your Canon Ip100 printer with the lid again and try to take another test print. If this method does not work, then call a professional for help.

How to Connect Canon Pixma MG3620 to WiFi on windows