Furnace Repair Tips From the Experts

If you live in cities that receive heavy snowfall, like Limerick PA, then you’ll probably understand the importance of a furnace.

You know your furnace is the reason you have warm days and cozy nights at home. Your furnace has been supporting you, and the least you could in return is tend to it regularly.

As a responsible homeowner, you need to keep vigilant about certain abnormalities in your furnace, which signal urgent repairs.

For instance, if you hear loud noises or notice strong gas smell from your furnace, your furnace is in dire need of repairs, and you should call in the experts from UGI Heating, Cooling & Plumbing.

However, before calling in the technicians, you should know what’s wrong with your furnace.

Therefore, we’ve enlisted a few tips to have your furnace checked before technicians arrive.

3 Furnace Repair Tips You Should Know

1. Check For Gas

Sometimes, the problem with your furnace may not be major at all. It might be something as simple as not enough gas.

Thus, checking for gas throughout your house is a must. Ensure you have hot water and gas on the stove top. In case no gas is present, you should contact your gas company.

If you are among those people who have the floor or gas furnace, ensure that the pilot flame is on.

In case no flame is present, you can always try lighting the pilot by pushing down the pilot button on the gas valve and start the pilot by lighting it with a matchstick.

2. Check The Thermostat

As technology has changed the way we operate temperature generated by home furnaces, you probably have a digital thermostat.

So the next time you don’t have any response when you turn on the heat? Be sure to replace the batteries in your digital thermostat.

Sometimes, the issue might be loose wiring. So, check the wires behind the thermostat and ensure they are all tightly connected.

However, in case your digital thermostat is blank with no lights, then it might be facing a power issue.

3. Check For Power

If you have a wall furnace or a floor furnace, then you’re might already be aware that they use electricity.

Thus, you need to ensure that the plug connected to your furnace undergoes a timely checkup.

Guess what? You can do this yourself by simply using an electric meter.

And if you don’t have one, you can use a small appliance or any electronic device such as a cell phone charger to check if power is present at the plug.

If you do not detect the presence of any power, go to the main power panel to ensure none of the breakers are turned off.

Note that, if your furnace is on but doesn’t stay on or is blowing cold air, then your furnace may be experiencing a sensor problem.

Final Note

Aside from the most common furnace problems, if you identify something more serious or beyond your repairing capacity, then contacting a technician is the only safe bet.  

UGI Heating, Cooling & Plumbing is the ultimate haven for all your HVAC needs. UGI is among the most trusted services for heater and Furnace repairs in Limerick PA and neighboring cities.

Give a quick call for high-quality service 24-hours a day, 7 days a week at 1-877-844-4822!