Taizy Corn Harvester

by allen guo Food Processing Machinery

First, both ears of corn can be harvested and corn stalks can be chopped to achieve the purpose of returning straw to the field.

Recommended Features

2. The unit is energy-saving and can be easily operated with only 18-32 horsepower.
Third, one machine is multi-purpose, light and flexible. This unit is used in combination with small tractors, and other operations can be performed by removing the unit tractor.
Fourth, high work efficiency.

Learn more about Taizy Corn Harvester»

Review on Taizy Corn Harvester

Installation and commissioning of corn harvester

1: Check whether the front bumper of the tractor is horizontal. If it is not horizontal, first correct it before installing the lifting frame.

2: Install the lifting frame on the bumper of the tractor, then use the pressure plate to tighten with screws, and then connect one end of the two oblique flat irons to the lifting frame, and connect the other end to the connecting seat welded to the tractor beam. fixed. Make sure the machine has good stability.

3: The connection between the host and the elevator is through the four U-shaped cards on the host and the two front supports on the lower part of the lifting frame. The two U-shaped cards on the upper part of the lifting frame then pass the four cylindrical pins and two movable lifting plates to the host. Connected to the lifting frame.

4: The diesel engine and the harvester reducer are connected with two B-type V-belts. After installation, do not press the tightening wheel too tightly. In the case of normal harvest, as long as the V-belt does not slip.

5: After assembly, run for 5 minutes at idle, and then run for 6 minutes at high speed. After checking all parts for abnormality, you can work in the field.

6: The adjustment of stubble height is realized by the adjusting screw of the lifting frame. Before harvesting, first adjust the cutter to contact the soil ground, then lock the screw to perform a trial cutting to see if the stubble is suitable, and if it is not suitable, adjust it to meet the requirements and then start harvesting.

7: Because the harvester is transported on the right side, when harvesting in the field, the harvesting method that improves efficiency is to harvest in circles around the plot.