RIFF Box 2 V2 JTAG for HTC SAMSUNG Huawei Unlock F

by vip fixphone sales manager

recommend a multifunctional cellphone repair tool: RIFF Box 2 V2 JTAG for HTC SAMSUNG Huawei Unlock Flash Repair Tool, suitable for all kinds of mobile phone, such as AlcatelAsusCoolPadLenovoDELL

Recommended Features

Package list:
- Riff Box 2 JTAG/EMMC
- 2x conneciton tapes IDC 20 pin
- 1x connection tape IDC 30 pin
- 1x universal PCB

Learn more about RIFF Box 2 V2 JTAG for HTC SAMSUNG Huawei Unlock F»

Review on RIFF Box 2 V2 JTAG for HTC SAMSUNG Huawei Unlock F

RIFF Box 2 JTAG is the phone Unlock / Flash / Repair Tool for HTC,SAMSUNG, Huawei. RIFF Box 2 is used for reading and recovery smartphones. Riff Box V2 is used to read and write memory eMMC / NAND using all kinds of communication protocols like eMMC (ISP Direct) / JTAG / I2C / SPI. Box fully supports 4-bit transmissions and allows you to read up to 52 MHz bus width.

Specification:
Dual-core Cortex-M4 MCU @ 204MHz;
PC to Box USB (Device) Speed: Hi-Speed (480 Mbps);
Box to Device (Host) Speed: Full-Speed (48 Mbps);
Supported SD/MMD revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher
SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz;
UART Interface;
RIFF? Smart Probing Feature;
Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.;
4 fixed 3.3V GPIO Lines;

Specification:
20-Pin Male Connector:
- JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST;
- SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins);
30-Pin Male Connector:
- SD/MMC Interface 1/4Bit @ 52MHz;
- Level-adjustable 23 GPIO Lines (1.65V to 3.6V);
USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec;
USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec;
RJ-45 Connector:
- RIFF? Smart Probing Feature;
- UART Port;
- 4 Fixed 3.3V GPIO Lines;