PSOP44 Socket

by Ctool Hu Consultant

EPROM Aapters, EPROM Programmer, PSOP44, PSOP44 socket adaptor. This is the PSOS44 socket adapter for chip programmer.

Recommended Features

To take out the device push the top of adapter ZIF socket and remove device from it.
When you finish work with adapter, remove it from the device programmer ZIF socket.
Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.

Learn more about PSOP44 Socket»

Review on PSOP44 Socket

PSOP44 socket Description
PSOP44 socket adaptor
EPROM Aapters, EPROM Programmer, PSOP44, PSOP44 socket adaptor. This is the PSOS44 socket adapter for chip programmer.
psop44 socket exporter from China. high quality, Reasonable price and one-stop exporting service. psop44 socket OEM, psop44 socket meet the standards of Europe, United States, Asia, the Middle East, Russia, Africa, North America.
PSOP44 Socket Adapter Manual
-Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have
some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the
orientation of the text of title is the same as the text on -the top of the device programmer.
-Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position
of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF
socket. Then release adapter ZIF socket. If you use this adapter for devices with less than 44 pins, then place
device to the bottom edge of adapter ZIFsocket. Upper contacts stay unconnected.
-Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is
ready for programming.
-Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the
adapter ZIF socket can damage the programmed device.
-To take out the device push the top of adapter ZIF socket and remove device from it.
-When you finish work with adapter, remove it from the device programmer ZIF socket.
-Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during
programming of device.
-For handling with the device we recommended to use a vacuum pick up tool.
-If programming yields isn't 100% when using programming adapter or if some unreliability appears, try to

Related to PSOP44 Socket

How to de-solder and repair broken Bosch EDC15C2 ECU from 2.0 HDI.

Here is a video/picture guide showing the steps required to remove the Flash chip after a failed write due to a bad remap file with incorrect check sums. Equ...

Newest UP818 up828 programmer socket adapter

up 818 programmer is obd2tuning UP-818 Series programmer.UP-818 Super fast Universal Programmer Support for the latest models of NOR FLASH, NAND FLASH, SERIAL FLASH.UP-818 Ultra programmer can u...

Related Resources

SIVAVA - PSOP 44 (with socket) Adapter \ Universal & Willem ...

TSOP 32, 40, 48 ( Socket) Adapter (5-in-One) The Adapters can change to 1. TSOP 32 Adapter 2. TSOP 40A Adapter 3. TSOP 40B Adapter 4. TSOP 48 (16bit) ...