Familiar with maintaining plastic g

by allen guo Food Processing Machinery

It should be noted that maintenance and repair are equally critical tasks. Maintenance is a protective measure against the wear and damage of machine equipment parts.

Recommended Features

Repair and replacement of parts is a necessary means to ensure that all production and manufacturing are properly done, so that machine equipment can exert its original performance.
These two tasks should be well combined to prevent dominance and prevent it from happening. Before the parts of the machinery and equipment are damaged and cannot be operated,
they should be repaired and replaced in time to ensure that the machinery and equipment have a long-term good operating state.
Preparations before starting the plastic granulator Clean the sanitary environment around the extruder, clean the extruder and the attached machinery and equipment.
Carefully study the safe operation rules of the extruder, understand and understand the function and function of each part and component in the structural characteristics of the machine equipment,

Learn more about Familiar with maintaining plastic g»

Review on Familiar with maintaining plastic g

Move the V-belt, the rotation should be relatively easy, and the screw of the extruder rotates without clamping. Check the rotation direction of the extruder screw. Check towards the barrel mouth. If the screw thread of the extruder is right-handed, the rotation direction of the extruder screw should be clockwise. Check whether the protective grounding of the equipment and control cabinet is tightened.

Appropriate and effective application of plastic granulators can increase the length of service life, the level of productivity and the quality of product quality. They are all related to the manufacturing quality of machinery and equipment and the selection of machinery equipment model specifications. However, how to allow the operator to use the equipment reasonably and how to pay attention to the maintenance of the equipment and equipment also has an immediate relationship with increasing the service life of the plastic pellet machine and all the normal productivity of the extruder. For the plastic granulator to be properly applied, it is necessary to pay attention to the following content.

The relative facilities and equipment of the production line should be matched, and the production capacity of each machine should be matched. Each machine can make full use of the efficiency, so that the machines of the production line can work in coordination. The oversupply or insufficient supply between the left and right process flow, termination, etc., are all attributed to the selection of unsupported facilities of machinery and equipment, and the unscientific selection of specifications and models. The model specifications of the extruder should be selected according to the product specifications and model requirements.