Zambia 500 tph manganese ore crushing production line

Chunks of manganese ore fed through the hopper by the feeder jaw crusher mobile jaw crusher station or uniformly crushing; manganese ore after crushing after vibrating sieve, supplied by the belt conveyor single cylinder hydraulic cone crusher for broken; broken after the manganese ore material into multi-cylinder hydraulic cone crusher for crushing;

Zambia 500 tph manganese ore crushing production line

Zambia 500 tph manganese ore crushing production line

Iron ore production line in Mongolia

Fixed granite crushing and screening production line

After the vibrating sieve of 0-12 mm manganese powder evenly sent a ball mill grinding, and screening by the spiral classifier, it does not meet the requirements to continue to be fed into the ball mill;

Will meet the requirements of beneficiation of manganese powder into a strong magnetic separator machine to remove debris and the resulting manganese powder into the dryer drying can be obtained manganese powder.

Electromagnetic vibrating feeder working principle, the entire system operates at a low critical resonance, mainly driven by the electromagnetic exciter tank at a certain angle reciprocating vibration, so that the material moving along the groove. Figure 2 (a) of the electromagnetic vibrating feeder works. Material 2 is placed by the main vibration spring 3 is supported on a feed trough body, the armature 4 and the main vibration spring integral tank, the coil 6 is wound around the core 5. Since flowing through the coil is the half wave rectified unidirectional pulsating current, and therefore, the electromagnet generates electromagnetic force corresponding pulse (FIG. 2 (b)). In the positive half cycle of the AC ripple current flows through the coil, between the core and the armature produces a pulsating electromagnetic force, so that the tank rearward movement of the exciter main spring deformed stored potential energy; in the negative half cycle, no current flows through the coil, the electromagnetic force disappears, the armature under the action of the spring force of the electromagnet to separate, so that the forward movement of the trough, so it trough to the AC power frequency, continuously reciprocating.