Zambia 500 tph basalt crushing production line
Stone blasting from the mountains down into the feeder by dump truck will be less than 1020mm of stone, the stone vibrating feeder evenly into the jaw crusher, jaw crusher for crushing stone were the first stage, the jaw stone crusher crushed in 150mm - 300mm or so, by vibrating feeder material into the hydraulic cone crusher for second paragraph broken, crushed material passes round vibrating sieve screening, more than 40mm material return to cone crusher crushing, 40mm or less material from the conveyor belt into the impact Sand shaping. After shaping the finished product after round vibrating sieve screening, transported by belt conveyor to the finished product area. Electromagnetic vibrating feeder for feeding the material evenly from the storage silo or other material storage devices or quantitative material to that device, is essential practice routine automation equipment at the open type and closed two kinds.
|
Guinea 600 tph iron ore crushing production line
Indonesia active lime production line
Depending on the installation hanging and desktop mode can be divided into several. Electromagnetic vibrating feeder structure is simple, easy to operate without Moist, small power consumption; can even adjust to the amount of ore; therefore has been widely used. Generally used for loose material. An apparatus according to performance requirements, the configuration should be designed to minimize the pressure on the material of the tank, according to the manufacturer requirements, effective Bunker discharge port shall not exceed the width of a quarter, the material flow rate control in 6-18m / min for larger quantity to material hopper bottom discharge should be set high enough to intercept mine board; to not impact the performance of the feeder, stopped mine board shall not be fixed on the tank. In order to smooth discharge silo for the quantitative massive, granular or powdered materials or continuous supply. Widely used in mining, metallurgy, coal, electricity, chemicals, food, glass, refractories and other industries. Electromagnetic vibrating feeder is a more complete two-particle orientation forced vibration of the elastic system. The entire system operates at a low critical resonance, mainly driven by the electromagnetic exciter tank at a certain angle reciprocating vibration, so that the material moving along the groove. Electromagnetic vibrating feeder works. Material 2 is placed by the main vibration spring 3 is supported on a feed trough body, the armature 4 and the main vibration spring integral tank, the coil 6 is wound around the core 5. Since flowing through the coil is the half wave rectified unidirectional pulsating current, and therefore, the electromagnet produces a corresponding pulsed electromagnetic force. In the positive half cycle of the AC ripple current flows through the coil, between the core and the armature produces a pulsating electromagnetic force, so that the tank rearward movement of the exciter main spring deformed stored potential energy; in the negative half cycle, no current flows through the coil, the electromagnetic force disappears, the armature under the action of the spring force of the electromagnet to separate, so that the forward movement of the trough, so it trough to the AC power frequency, continuously reciprocating.
Post Your Ad Here
Comments