Why is my HP printer not printing color clearly?

by Lucas Smith Technology Expert

Throughout the years to use of HP printers has extremely increased they are durable have an innovative design and the print quality is high and accurate. The printer has many more advantages but it also has few issues like HP Printer Not Printing Color properly which every other printer has specifically when you are in an emergency and you need a printout ASAP.

Several factors that affect HP Printer Not Printing Color accurately

Facing issues like why HP Printer Not Printing Color HP printer not printing color accurately can happen due to many circumstances essentially the ones noted below:

· Corrupt printer drivers

· Dry/empty ink cartridges

· Paper jam problems

· Corrupt installation of printer firmware

· Inaccurate printer configuration

· Compatibility issues

· Dust is present in the printhead or damaged printhead

· Utilizing duplicate ink

Also Check : How To Install Printers Drivers

Most Efficient Ways to fix HP Printer Not Printing Color

· Make sure that the proper paper is clicked in the printer driver. Make sure that the paper is clicked under media type under the Main tab for windows or the quality and media under the pop-up menu of the Print dialog box for macOS coordinates with the paper stacked in the printer.

· Print the nozzle check pattern to assure that the Ink is discarded correctly. If the nozzle check pattern is not printing out correctly check if there are any missing colors the reason why the tanks being empty. If the paint ink tank is full and yet the printer does not print wipe clean the printhead then try printing Again the nozzle check pattern to assure ink is discarded properly. If your problem is not solving and the printer is not printing make sure you clean the printed twice and also deep clean it. Even after that the printer is not printing then switch off the printer clean the printer deeply after 24 hours. And the problem is repeating even after deep cleaning then the print head is damaged you must visit your nearest customer care executive

· Assure that you are printing on the precise side of the media. The printer can only print from one side of the media. If you print on the wrong side of the media that may cause unclear prints with the low printing quality.

· Make sure the particle concentration of the ink is equivalent. If you're not using the printer for a long time the ink particles in the tank will settle down and this will cause an irregular particle concentration. The thing you can do is you can perform print head cleaning or you can press the start resume or cancel button and the printer will shake the ink tanks. To sustain high print quality press resume or cancel on the printer every week so that the printer shakes the ink tanks.

· Make sure that the features of the printer driver are inserted correctly. Or if the quality of the photographs which are taken and adobe RGB mold is not adequate configure the printer driver and put a profile and then print again it May improve the quality of the print. Go to printer properties and the dialog box. On the main tab click manual for color or intensity and then select set.

· Open the printer properties dialog box.

· From the Main tab, now just select the Manual mode for Color/Intensity, and then click Set.

· click ICM [Windows Image Color Management] for Color Correction.

· click Adobe RGB(1998) for Input Profile.

· If Adobe RGB(1998) is not shown, install the Adobe RGB(1998) following the method explained in your setup sheet.

The straight lines are not in Line. Make sure the printer is in line. Printing when the printhead is not in line. perform an automatic printhead alignment if this also doesn't solve the problem look for manual printed alignment
Inside the printer driver settings, click a higher Print Quality setting.

· Now just go to the printer properties dialog box.

· Then on the Main tab, select High for the Print Quality setting.

· Click the Print dialog box.

· The Print dialog box can normally be opened by clicking Print from the File menu in your application program.

· Click Quality & Media under the pop-up menu and select Detailed Setting.

· After the process now move the Print Quality slide bar to the Fine end.

Hope this helps fix HP Printer Not Printing Color problem