The diesel generator set will generate a lot of heat during normal operation. Too much heat will cause the temperature of the unit to rise, which will affect the work efficiency. Therefore, the cooling system should be equipped in the unit to reduce the temperature of the unit. At present, the common generator set cooling systems include air cooling and water cooling. Which is better, air-cooled generator or water-cooled generator?Before making a choice, let’s first understand the technical characteristics of these two types of heat dissipation generator sets.
Air cooled generator.
1. The engine must be air-cooled by the supporting radiator.
2. Radiators shall be sub mounted on specially designed and approved supports.
3. The radiator must be equipped with a flange joint of the ventilation pipe so that the ventilation pipe can be attached to the radiator. An air duct with flexible connector shall be installed between the radiator and the metal louver. Pipes shall be made of galvanized sheet steel. All pipes shall have sealed joints.
4. The fan must have sufficient capacity and take into account the additional resistance of air flow through ducts and louvers.
Water cooled generator.
1. The engine must be water-cooled by a supporting radiator, including belt driven fan, coolant pump, thermostat controlled liquid cooled exhaust pipe, intercooler, corrosion-resistant coolant filter suitable for local conditions.
2. Radiators shall be sub mounted on specially designed and approved supports.
3. The radiator shall be equipped with a flange joint of the ventilation pipe so that the ventilation pipe can be attached to the radiator. An air duct with flexible connector shall be installed between the radiator and the metal louver. Pipes shall be made of galvanized sheet steel. All pipes shall have sealed joints.
4. The fan must have sufficient capacity and take into account the additional resistance of air flow through ducts and louvers.
5. Corrosion inhibitor must be added to the cooling system.
6. The cooling system must be equipped with coolant heater to keep the coolant temperature above 20 ℃ to ensure easy start-up when necessary. Antifreeze must also be added to the cooling system.
The above are the technical characteristics of air-cooled generator and water-cooled generator introduced by generator manufacturer Dingbo Power. The advantages of air-cooled generator are simple structure, easy maintenance and no risk of frost crack or overheating boiling, but it has high environmental requirements and high noise. It is more used in small gasoline generator and low-power diesel generator set.The advantage of water-cooled generator is that the cooling effect is ideal, the cooling is rapid and stable, and the power conversion rate of the unit itself is high. At present, the common diesel generator brands Cummins generator, Perkins generator, MTU (Mercedes Benz) generator, Volvo generator,Shangchai generator and Weichai generator are generally water-cooled generator sets. The user shall select the generator set that meets the requirements according to the actual situation.
If you want to buy a diesel generator, please contact us by email and choose Dingbo Power to ensure that you will not be disappointed.Our email is dingbo@dieselgeneratortech.com.
Comments