What you need to know when Restoring your Furniture?
by John W. Digital Marketing ExpertFurniture has become very
important today. We all live in a house that is full of furniture. In our house
we have some furniture which is no more attractive and some which is given to
us as gift.
What can be done with those
unwanted or shabby furniture? The answer is Furniture Restoration. On most of the furniture there is a clear
finish of shellac, lacquer or varnish.
Restoration
can include: -
- Repairs or replacement of parts
- Polishing or refinishing
- Fabric or leather change
Restoration
techniques
First of all you need to
identify the type of finish of your furniture.
1. Cleaning Technique
In the process of furniture Restoration
Dubai, cleaning is the easiest restoration technique. It may
be that due to dirt the furniture is looking dull. So first of all, you should
try some cleaner to remove the dirt and wax. If the cleaner doesn’t work for
you, mix some warm water and detergent and try to clean the furniture. If the
detergent also doesn’t work, try out some solvent according to the type of
furnish of your furniture.
2. Re-amalgamation
When you find your furniture has cracks and
scratch then Re-amalgamation gives a new look to your furniture. Cracks and
scratches may occur due to sunlight and temperature changes which can be
eliminated. The type of solvent to be used depends on the type of finish. The process is to be repeated if the cracks
are deep. After this, furniture will slightly become dull, so polish the
furniture once.
3. Over-coating
After a period of time any
material wears off. Sometimes there are huge spots on furniture or sometimes
the whole furnish gets worn. In this case the solution is Over-coating. Clean
the whole furniture and then coat it again.
4. Decoration
The above 3 restoration
techniques may not always be successful. So another furniture Restoration in
Dubai technique can be decorating furniture. Special effect finishing can
be done. You can make your furniture an antique piece. You can cover the
furniture with enamel.
Restoration
tools
Generally, it is a process
done with hand tools. Certain power tools can also be used to do work faster.
The tools that are used are
1. Thick stripper for paint
removal – To remove thick coats of paint.
2. Thin stripper – Thin
stripper is used for finish removal
3. Power sander – For smoothing the surface
4. Sandpaper
5. Wipe stains – For wiping
stains and finishes
6. Cloth
7. Steel wool and wax –
After wiping out, finish will be cured with 2 weeks. Then softly rub with steel
wool and paste wax or you can choose custom
painting Dubai service.
8. Others – tape, pencils,
marker, finishing nails, ammonia, brush cleaning, etc.
So, don’t think that your old furniture is waste. There are various techniques and tools to restore it.
Sponsor Ads
Created on Jul 10th 2020 05:25. Viewed 222 times.