What Type of SS Control And Packing Table is Correct for Your Clean Room?

SS Control And Packing Tables are manufactured from different kinds and gauges or depths of stainless steel. Here are a few rules for selecting a table from a SS Control And Packing Table Supplier for a cleanroom, laboratory area, or germ-free environment.

Clean Room Table

The SS Control And Packing Table must be completed of a higher grade 304 or 316 stainless steel. The scale of stainless steel would be contingent on if the table will be used for holding weighty objects. If this is the case a weightier gauge must be selected such as 14 gauge vs 16 gauge. The underside of the work surface must have cross braces to safeguard strength.

Clean Room Terminal

A SS Control And Packing Table with 12” eclectic overhead cantilevered shelves permits storing space in the work area without encumbering the tabletop. The overhead shelves can be completed of stainless steel or chrome. The table bottom can have a lower shelf, C border, or H edge which would permit the table to be used in a sitting location.

Germ-free Cleanroom Table

An electropolished SS Control And Packing Table deliver rust resistance when cleanroom cleaners and germ-free sanitizers are used to wash down equipment. The electropolished table is spotless, microscopically level, and has a “mirror” surface. SS Control And Packing Tables will corrode if the chromium oxide coating on the surface is detached from a cut or chlorine solution. The electropolishing process eliminates the metal ions from the stainless steel which would reason erosion from the chlorine.

Semiconductor Clean Room Table

A critical spotless setting used in the semiconductor industry frequently needs a punched SS Control And Packing Table to be used. The punched work surface permits the HEPA or ULPA-sieved clean room air to pass through the holes in the work exterior and keeps the area spotless of airborne particulates. Stainless steel can have a soft or electropolished surface. If funds are more of a worry a stainless steel cable shelf with four posts and a lower shelf or C edge can purpose as a table.

Class 10,000/Class 100,000 Cleanroom Table

A normal type 304 SS Control And Packing Table with a lower stainless steel shelf or C edge would be a good choice. An alternative would be a Formica bench with lower stainless-steel bottom. When selecting a Formica table for a cleanroom setting the underside of the tabletop must be closed with Formica or backer so the wood central is not exposed.

Lab Table

Generally, a laboratory environment will have less anxiety with atoms and not smeared down as lengthily as in a cleanroom or sterile area. A normal SS Control And Packing Table bought from SS Control And Packing Table Dealers with galvanized steel lower shelf or C edge could be used. The spurred steel will oxidize if unprotected from water or compounds. If the laboratory area is a comparatively dry area a type 430 SS Control And Packing Table could be a less luxurious alternative to a kind 304 SS Control And Packing Table.

Controlled Setting Table

There are sites outside of the cleanroom that needs an assembly or performance area. The kind 430 SS Control And Packing Table with a minor galvanized steel shelf could be used. An alternate would be a cover table top with parched enamel-painted lower base.

ESD Terminal

A distinctive ESD terminal would have a still dissipative laminate worksurface with a tinted steel base. Verticals can be affixed on the back of the table to permit overhead cantilevered ledges, bin bars, electrical strips, lights, and ion blowers positioned over the work area. If the terminal is positioned in a cleanroom the underside of the work superficial must have a phenolic backer so the wood core is not unprotected.