Vxdiag C6 Automotive Diagnostic Tool For XENTRY Diagnosis VCI For Mercedes Benz

by Xing T. ***

Vxdiag C6 Multidiag Diagnostic Tool For XENTRY Diagnosis VCIFor Mercedes Benz Powerful than MB SD C4/C5

Description:

VXDIAG For XENTRY Diagnosis VCI is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC.

※ Important reminder: Please contact us before purchase to confirm that the equipment is compatible with your model, or we will refuse the return request, if the return reason is incompatible model.

Kindly note:

1.Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken.
2.You also can watch more videos to get more technical support from official website:

3.This VXDIAG can/'t support All Key Lost, needs one key at least.

4.Recommend: We can offer second-hand and random brand laptops. Vxdiag C6 + HDD Software + Second hand Laptop of random brand + Pre-installation = Full Set Ready To Use.

VXDIAG For XENTRY Diagnosis VCI Overview:

Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)

VXDIAG For XENTRY Diagnosis VCI Features:
VXDIAG For XENTRY Diagnosis VCI can be used for most model series of For Mercedes For Benz vehicles
VXDIAG For XENTRY Diagnosis VCI support DoIP, cover more functions during SCN Coding than SD C4/C5
VXDIAG For XENTRY Diagnosis VCI functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
VXDIAG For XENTRY Diagnosis VCI Diagnosis updates no longer necessary – firmware updates required on rare occasions
VXDIAG For XENTRY Diagnosis VCI does not need a power supply unit for external power supply
VXDIAG For XENTRY Diagnosis VCI Handy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)

Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP/ ASR/ ETS/ ABS/ BAS/ SBC braking systems
Supplementary Restraint Systems (SRS)/ Airbag, All body modules OCP/ UCP/ LCP/ SCM/ SKF/ KFB/ RCM/ DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM/ EAM/ DAS/ SEM/ VG Transfer Case)
Assyst & ASSYST + systems

VXDIAG For XENTRY Diagnosis VCI Summary:
The new VXDIAG For XENTRY Diagnosis VCI (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
The VXDIAG For XENTRY Diagnosis VCI does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

PC Requirement:
Processor: Pentium 4 / 1.6GHz+.
Memory: 1G Bytes or more.
Hard disk: 40G or more.
Display: Resolution 1024x768 or higher.
Network interfaces: LAN 10 / 100M or 802.11b / g.
Communication Interface: USB2.0 or USB3.0

Screenshot display: