user manual of clone FGTech Galletto 4 software

this installation guide will help you how to install fgtech galleto 4 software on your laptop, and Installation Tips for clone FGTECH GALLETO 4 V54 software, FGTech Galletto 4 Master is latest version FGTech Galletto chip tuning tool, FGTech V54 is an professional and universal ecu chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum


installation instruction for V54 FGTech Galletto 4 software

Step 1: Install sw to default place c:fgtech

Step 2:  Connect galletto v54 to usb port, the new hardware should be found. or you need check the reasons,

Step 3:  Go to device manager and unistall actual driver of fgtech. Unplug fgtech from usb and plug it again.

Step 4:  Install drivers provided into c:fgtech folder. This is important, older drivers won't work,

Step 5:  Then make usbfix with same file FG as used with v53.

Step 6:  Then try to open Galletto 4 Master software, if your operation system is xp, pls run eobd.exe not eobd2.exe, If OS is win7, pls run eobd2s.exe.

FGTECH GALLETO 4 V54 software download

http://pan.baidu.com/s/1gdiT6Xd