Useful Cleaning Tips for Security Screen Doors Melbourne

by Jerry Smith Marketing Manager

Security doors Melbourne have advanced a lot and they have now developed to become the first line of defence for thousands and thousands of homes all across the nation. These installations offer robust protection not just from unauthorised success of the humans, but when screens are installed in them, they will also keep pests and insects at bay. However, to make sure that they continue to perform flawlessly for years and years, it is important that maintenance and look after is offered and this can be done some ways that we have described here in this post.

Anodised Surfaces

According to security screen doors Melbourne, it is very important that dusting is done to prevent any accumulation of dust, dirt, grime or any other foreign object that can damage the surface.
Other than dusting, if cleaning or washing is required, this can be done very easily by using clean water and a small amount of mild detergent.
However, experts say that any kind of abrasive cleaning solution or material should not be used at all as with them there would be an amplified risk of damaging the surface or the body itself.
At the time of washing, it is very important o thoroughly wash away any residue of any cleaning solution with the help of clean water.
Powder-Coated Aluminium
If your security screen door Melbourne is made up of powder coated aluminium, it is very important that deposited grime and moisture are removed as they can be a risky combination for this coating.
It should be made sure that the surface of the security screen doors Melbourne is kept absolutely clean by removing all dust, dirt, grime and any foreign matter.
This can be done very easily with the help of a soft sponge and clean water that has some very mild detergent mixed in it in a very small quantity.
This water can be used to thoroughly wash away any dust, stubborn marks, grime and with this step, deterioration of the power coated aluminium can be prevented.
Here too, it is recommended by the vendors of security doors Melbourne that any harsh or abrasive cleaning solutions should not be used at all and care must be taken to ensure the coated surface is not removed.

Frequency

As far as the frequency of cleaning these security screen doors Melbourne is concerned, experts say that it basically depends upon your observation and on the area where you live.
In any case, a general recommendation is that this cleaning of security screen doors Melbourne should be done one in every three months, but dusting should be done almost every week.
However, it the security screen door Melbourne is being installed in a commercial or industrial set-up, this cleaning should be done every 2-4 weeks or even earlier if they appear dirty.

As far as cleaning security screen doors Melbourne is concerned, all of their parts need cleaning and here in this segment, we will have a look at these parts and the cleaning they require.

Door Closer: They will need an adjustment to close the door at a slower rate to avoid slamming.
Squeaky Doors: If doors are squeaking, you can lubricate the hinges to eliminate the noise.
Locks: locks should also be lubricated inside the key cylinder area on both sides.
Levers: Lever should be lubricated in the mechanism.

Learn More