Understanding The Correct Way For Sydney Asphalt Repairs

While paving a parking lot or an asphalt driveway, there are many contributing factors that make asphalt a great material to use. When compared to the other materials such as concrete or concrete paving blocks, it is relatively inexpensive material. 

To the basic wear and tear of vehicle and foot traffic, asphalt is a very durable product that stands up well. As asphalt is a green product which is recycled more often than any other paving product, is another great reason to use asphalt for your paving needs and while doing these you should not be ignoring Sydney asphalt repairs and maintenance.

After a period of time, resurfacing or replacing of the material of a driveway or parking lot may be necessary. From sealing or other types of minor repairs, this is quite different. 

Resurfacing is an option which is considered by a lot of people because of financial concerns although this will not last as long as the installation of new asphalt.

The finished job will be determined by the level of preparation and the competence of the contractors as in most of the projects of asphalt repairs Sydney.

The old drive will have to be removed by the contractor in a complete tear-out. Followed by a course of a compacted asphalt base, an initial layer of compacted gravel will then be applied. 

In thickness, this layer is usually about two to four inches. This is followed by the application of the final layer of the compacted material.

The surface course of asphalt is installed on top of the existing surface of the driveway or parking lot during the process of resurfacing. As they are made with the same material, the two layers will adhere together easily. 

Even on a concrete drive, asphalt can be installed. To ensure that the concrete does not shift under the new surface, you need to implement certain precautions. The drive will last for several years as a proper precaution will ensure that this does not happen. 

In order to know if the existing concrete driveway is suitable or not there are a number of things that need to be checked. The joints must be closed and the blocks should be leveled.

There are certain things that you need to watch for no matter what the type of installation you would want to do. So that the rainwater is carried to the street or to a catch basin, drainage should be taken into consideration.

The water should be restricted to be flowing back into your garage or onto a neighbor’s property. It is also ensured that the edges are supported properly. For your asphalt resurfacing project, it is vital to choose a competent contractor. 

Asphalt and concrete are both made of stone and sand and the difference comes in the adhesive at the end of the day. While asphalt uses tar, concrete users cement as an adhesive.

Bending beneath the weight of vehicles as concrete is more likely to crack this is what gives asphalt its great level of flexibility to your asphalt driveway. 

Report this Page