Types of Houses Air Duct Cleaning Services

Air Duct cleaning refers to the cleaning of various heating and cooling system components of the forced air system. This is very important to increase the efficiency of the heaters and coolers. It is basically the removal of dust and foreign particles as when the air flows they become an obstacle. So Calgary Air Duct Cleaning services is very important to increase the effectiveness to your home internal atmosphere. There are different methods for air duct cleaning. They are:-

Rotary Brush and Vacuum

For the dry dust application, this method is used in commercial and public buildings. In this, the ductwork system is split into workable segments and an access door is fitted at every end. Either side of these doors jamming foam is put in so that air can only travel in the workable segment. A big and powerful air vacuum unit is then linked to one access door opening whilst a rotary brush is inserted via the other access door. Then the unit is switched on to produce a negative pressure within the ductwork section and the dust, agitated by the rotary brush, is sucked out of the ductwork.

Air Whip and Vacuum

It is also called as Rattlesnake as at the end of the hose lot of noise is produced when it moves down the ductwork. In this, a length of hose with an air diffuser on the end has compressed air forced through it. As the air is released from the diffuser the dirt is stimulated towards the vacuum unit. This system has a particular advantage on little cross part ductwork but It is difficult to control on the larger cross part as the diffuser frequently leaps back on itself.

Manual Cleaning

When the ductwork is too large or the residue which is present inside the ductwork is humid and obstinate it is difficult to remove by rotary brush or compressed air.  Large section ductwork in an overload of 800mm diameter or square cannot be efficiently made dirt free by rotary brush or air whip methods. Provided the ductwork has been put into DW144 with the appropriately specified supports it will support operative entry with tools and a moveable vacuum unit to gather debris. It will be essential for these operations to have restricted space training certification which allows only one working inside the ductwork at any occasion with one another in attendance external the ductwork ready to help when any difficult takes place.

Conclusion:

Air Duct cleaning refers to the cleaning of various heating and cooling system components of the forced air system. This is very important to increase the efficiency of the heaters and coolers. For the air duct cleaning, there are three ways. One is Rotary Brush and Vacuum. The second option is Air Whip and Vacuum. The third and the last one is Manual Cleaning which is done when the other two can’t be used. This is done for bigger units. Thus Air Duct Cleaning services in Calgary is very important for a good working of the instruments and better Indoor Air Quality.