Troubleshooting: What to Do When Your Air Conditioner Is Not Blowing Cold Air

Is your air conditioner blowing warm air? It’s a common problem that many homeowners face on hot summer days. But don’t worry—there are ways to troubleshoot the issue and get your air conditioner back up and running. In this blog post, we will walk you through the steps of troubleshooting your air conditioner so you can get it cooled off again. We’ll discuss what could be causing the issue, as well as how to diagnose it and possible solutions. Read on to learn more about troubleshooting when air conditioner not blowing cold air!

Check the air filter

If your air conditioner isn't blowing cold air, one of the first things you should check is the air filter. Over time, air filters can become clogged with dust and dirt, which can restrict airflow and cause your AC to work harder than it needs to. As a result, your AC may not be able to cool your home as effectively.

Check the thermostat

If your air conditioner is not blowing cold air, one of the first things you should check is the thermostat. If it is set to “cool”, make sure that the temperature is set below the current room temperature. If it is set correctly and your air conditioner still isn’t blowing cold air, move on to the next troubleshooting step.

Check the compressor

If your air conditioner is not blowing cold air, the first thing you should check is the compressor. The compressor is responsible for circulating refrigerant throughout the system. If the compressor is not working properly, it will not be able to circulate the refrigerant and your air conditioner will not be able to produce cold air.

There are a few things you can do to check if the compressor is working properly. First, check to see if the compressor is running. If it is not, then it may be frozen or locked up. You can try thawing it out by turning off the power to the unit and letting it sit for a few hours. If this does not work, then you will need to call a technician to replace the compressor.

Another way to tell if the compressor is working properly is to listen for any strange noises coming from it. If you hear any hissing or clicking noises, then there may be an issue with the compressor.Again, if this is the case, you will need to call a technician to have it repaired or replaced.

Check for leaks

If your air conditioner is not blowing cold air, the first thing you should do is check for leaks. Leaks can occur in the ductwork, at the seams, or in the unit itself. If you find a leak, seal it with duct tape or a similar product.

Once you've checked for leaks and sealed any that you find, take a look at the coils. The coils may be dirty, which will prevent the air conditioner from blowing cold air. Clean the coils with a soft brush and then vacuum them.

If your air conditioner still isn't blowing cold air after checking for leaks and cleaning the coils, it's time to call a professional.

Conclusion

In conclusion, air conditioners can malfunction in a variety of ways. When your air conditioner is not blowing cold air, you have some options to troubleshoot the issue. Check the power supply and filters first; if that doesn't work, then call an experienced technician for help. In any case, you should address the problem as soon as possible so it does not worsen or cause more expensive damage in the future.