TREE SURGERY

Imagine you have a garden in the backyard or in front of your house, and you decide to cut one of the trees from your landscape. Isn’t it just to pick an axe and start cutting the tree? Surely not, there are many other factors involved during the cutting of tree. The first step is How to fell a tree. There are many things which are kept in mind while cutting a tree. First of all, there should be a spacious place where a tree can fell, not damaging any property. Felling a large tree is very dangerous if not done correctly. There are some guidelines which need to be followed while cutting a tree. The most important thing is protection. Remember that felling a tree is a very dangerous activity. Dress in protective costume before starting the process. The tools should not be rusted. Make sure you have all the tools you need. Then access the condition of the tree, look for dead branches and cracks. Check for the height of tree, branch distribution, wind direction and etc. And last but not the least, make an escape route.

After you have managed to fell a tree, the next step involves Stump Removing. That is, getting rid of tree stumps. This can be the most difficult part of tree removal. After a tree has been cut and felled, the tree stump is usually a small remaining portion with the roots still in the ground. Rings in the tree stump define the age of a tree. Tree stumps can be difficult to remove from the ground. They can be dug out, shredded with a stump grinder or burnt. A common method for stump removal is to use chemical stump removal products. These chemicals are made of Potassium Nitrate and are intended to speed the decomposition of the unwanted stump. It is most commonly in granular form. Some of the Stump Removal methods are rotting, grubbing and burning. Rotting is the most time consuming method, while grubbing is the quickest but most difficult method for stump removal. Whereas, burning of stump removal is the least recommended method to follow. Many chemical stump removers are available in the market. Some of them are ineffective and total wastage of money.

Next step is the Stump Grinding. It is a process of removing tree stumps by means of a stump grinder. Stump grinder or stump cutter is a power tool that works by means of a rotating cutting disk that chips away the wood. Stump Grinding is extremely necessary because they are ugly; they attract termites and other insects and tree removal is not really finished.

If you or any one of your known ones is interested in removing a tree from their landscape, it is a humble advice not to do it yourself. It requires special techniques and trained people to accomplish this task. State Wide Tree Service helps you in your tree surgery. They have years of experience in this field. They have professional men that are available for your service. They guarantee you clean and tidy work with full safety. All work is carried out according to Australian Industry standards. So you do not have to worry about all this. Just call State Wide Tree Service and they are at your door step.