Top 6 Maintenance Tips For Automatic Driveway Security Gates

Automatic gates are undoubtedly a great way to secure houses and business establishments. Not just these are secured structures, but also convenient and practical. Most of the automatic gates in Melbourne have simple operation and demand little maintenance, but even a little, these expensive gates at least demand some attention once in a while. Many gates come with magnificent designs and hi-tech technology worth quite a lot. Although these gates are long-lasting and do not demand any maintenance per se, still to maintain it for a while is a good idea.

1.       Keep it clean

As you wash your automobile to make it look best, so does your gate. So, it is important to wash and occasionally wax to keep it looking beautiful all through the year. It is a poor choice to wait for your expensive gate to get tarnished, discolored and flaked off before you remove and sandblasted it for a new coat. A proper maintenance after every six month will make it long-lasting and keep you away from the pain of expensive renovation.

2.       Do take care of your spray

For wrought iron gates Melbourne, typically on the “actuator” type of opener, it is important to spray silicon spray directly into the inner tube that passes through the arm. Always use silicon spray as this only gathers dirt and grime and helps to remain the inner seal flexible. It also helps in cold environment as it helps to get rid of moisture trapped inside the arm and thus avoid any “freezing up”.

3.       Maintenance in the hinges

The hinge area of automatic gates in Melbourne definitely demands lots of attention. Many steel fabrication Melbourne manufacture ornamental swing gates, which have grease fittings on them. These fittings require regular greasing, probably 4-5 times a year. It is important to check the tightness and sturdiness of gates. Check any small crack before it becomes big and creates a big hole in your pocket.

4.       Dealing with pests

Any electrical box if unattended for long will into a little home for pests. Other than insects, spiders and other pests, outdoor electrical equipment could be damaged by snail, and reptile. In rainy season, snails and slugs could be detrimental to the circuit board. The slime trails are good conductor of electricity and could cause damage. So, it is important to check periodically all your circuit boards.

5.       Purchase high quality gates

Automated gates can last for decades if maintained properly, therefore, always buy a good quality of gate, even if you need to spend more than your budget. High quality gates are resistant to small intrusions like pests and circuitry is more solid. Even if you buy an expensive gate, it is important to keep check once a while.

6.       Lubricate chain drive slide

For chain drive slide gates, it is important to grease it regularly. Chains ought to be pliable and without oiling it easily tends to become rough and therefore deterrent to smooth functioning of gate. WD 40 shouldn’t not be used to lubricate, rather use heavy grease a better option. The best lubrication is obviously white lithium grease.

Author’s Bio - Ryan Edgerton is a professional housing contractor for last 10 years. He has his own business running in Melbourne and working with various clients, offering them best quality wrought iron gates in Melbourne. He has lots of experience in complete installation and annual maintenance of different household things including automatic gates Melbourne, security doors, windows etc.