Tips on saving energy on electric bikes

by love senada lovesena

The climbing technology of electric bicycle is not complicated, pay attention to a few points, you can easily climb the hill and enjoy the convenience brought by electric bicycle. At the same time, you can also extend the service life of the battery and reduce the maintenance cost of the electric bike.

This article will introduce some tips on how to use electric bicycles to climb hills with less effort, to help you better enjoy the convenience of electric bicycles.

1. Choose the right electric bicycle

When buying an e bike 1000w, you must choose the right model for you. Generally speaking, there are three types of electric bicycles: front-drive, rear-drive and mid-drive, of which mid-drive electric bicycles are the most energy-efficient. Because the motor and gears of mid-drive electric fat tire bike is combined together, they can make better use of electricity and provide greater power output, especially when climbing hills, which can be easier.

2. Reasonable speed control

When climbing a hill, don't just pursue the speed, you should control the speed reasonably. If the speed is too fast, it will make the motor consume too much power and cause the battery power to be consumed too fast. Therefore, you should decelerate appropriately and keep a stable speed when climbing a hill, which can save more energy.

3. The reasonable use of booster mode

Electric bicycles have a variety of booster modes, such as high, medium, low and no booster. When climbing a slope, you should choose the appropriate booster mode. Generally speaking, high assist mode can climb quickly, but the battery power consumption is faster; medium assist mode can climb smoothly and the battery power consumption is moderate; low assist mode can save electricity, but the climbing speed is slower. Therefore, you should choose the appropriate power mode according to the actual situation to achieve the effect of power saving.

4. Reasonable use of gears

Gears are the key to 1000w fat tire ebike climbing, and the reasonable use of gears can achieve the effect of saving energy. When climbing, you should choose the right gears, don't overuse low-grade gears, and don't use high-grade gears. You should choose mid-range gears, which can make better use of electricity and provide greater power output.

5. Reasonable control of body weight

When climbing a hill, you should reasonably control your body's center of gravity to achieve the effect of saving power. You should tilt your body forward and put your center of gravity on the front wheels of the car, so that you can make better use of electricity and provide greater power output. At the same time, you can also make the vehicle more stable by adjusting your body's center of gravity to avoid a rollover situation.