Things to Know about Electric Brake Control Units & Their Installation
A brake control unit also termed a brake controller is an electrical device that activates and regulates a trailer's electric brakes, as the name says. A brake control unit can be divided into two parts: an interface that is located in the cab and is within reach of the driver, and the main part that is responsible for triggering the trailer's brakes.
When it comes to riding in a caravan, trailer or camper in tow, make sure you have the proper braking system. This is very important to avoid any serious accident. With safety at the forefront of any trip, go through this article to know how to tell if you need an electric brake control unit.
When Do You Need an Electric Brake Control Unit?
If there are electric brakes fitted to your caravan, trailer, or camper, you need an electric brake control unit. With the help of a brake controller, the caravans or trailer brake system know how much braking power is required to stop, allowing the electric brakes to handle the maximum braking power without depending on your vehicle to use all its power to slow or stop the trailer or caravan down.
It’s a government requirement to opt for electric brake control units installation in Canberra to at least one axle of any caravan, trailer or camper that weighs between 750kg and 200kg. For a camper, trailer or caravan that weighs between 2000kg to 4500kg, the requirement is to have brakes on all wheels.
This is considered the most common electric brake that must have an electric brake controller. Moreover, a break-away system must be installed, which means the brakes can still be applied if the caravan, trailer or camper detaches from the tow vehicle accidentally.
Installing an Electric Brake Control Unit
An electric brake control unit is an important piece of safety equipment. Getting them installed with a professional ensures the right compliance with the regulations. If not properly installed, it can render the brake system on your caravan, trailer or camper ineffective, resulting in no brake application and having the potential for an accident.
How to Tell if You Need an Electric Brake Control Unit
If you are not sure if or how any of this applies to you and your vehicle, please get in touch with an experienced electric brake unit supplier in Canberra for the best possible advice. He can also help you with anything you need to get out on the road, doing what you like.
You will always get expert advice and installation with the supplier, whether it’s a trailer, towbar, roof racks, bike rack, a roof pod box or even brake controllers.
Hope, this load of information has helped you a lot to know about electric brake controllers. If you find this article useful, don’t forget to share it with your friends, and get back to us for more exciting content!
Author’s Bio - The author is one of the reputable electric brake control unit suppliers in Canberra, and is an avid blogger.
Advertise on APSense
This advertising space is available.
Post Your Ad Here
Post Your Ad Here
Comments