Articles
The way to Set up an HP Photosmart C4180 Printer
by John Handson Drivers About the HP DriversThe Hewlett Packard C4180 all-in-one printer is often a multifunction machine that prints, copies and scans. The printer connects for the pc by means of a USB printer cable. The cable will not be sold using the pc but has to be bought separately. The computer system requirements application drivers installed ahead of working with the printer together with the pc. The CD together with the drivers comes with all the printer, but are readily available to download from HP should you misplaced the disc. You may also print pictures straight off a memory card by inserting the card in to the suitable slot around the front in the printer.
Directions
1. Insert the CD that came using the printer in to the CD drive. The driver installation will start off up automatically. Comply with the prompts to set up the HP C4180 Printer driver. In the event you usually do not possess the CD, take a look at the HP web page listed within the Sources section and select your operating program. Download the driver, then run it in your laptop following any prompts to set up the driver.
2. Plug the printer in to the wall using the energy cord. Plug the printer in to the pc working with the USB 2.0 cable. There is certainly only 1 port around the back with the printer exactly where the cord can match.
3. Print a test web page. The printer drivers installed the printer for your computer system, producing it able to use.
Sponsor Ads
About John Handson 
Drivers About the HP Drivers
10 connections, 0 recommendations, 39 honor points.Joined APSense since, September 4th, 2013, From shenzhen, China.
Created on Dec 31st 1969 18:00. Viewed 0 times.
Comments
No comment, be the first to comment.
