The right way of utilizing the cobble sand making machine

1, pebble, sand making machine and energy models ought to be installed firmly.If your pebble sand making machine fixed operation for any lengthy time period, ought to be fixed based on cementIf a pebble sand making machine is, unit ought to be placed on the made from Position iron frame, and be sure that energy generator (diesel or motor) and sand making machine lever groove within the same rotary surface.

2, pebble, sand making machine after installation to check on each fastener tighten situation, when the screw loose.Simultaneously to check on if the belt elasticity. 3, cobble vsi sand making machine, before beginning to show the rotor manually, first look into the tooth claw hammer, and rotor operation is flexible and reliable, and you will find no collisions within the spend, the direction of rotation from the rotor machine an arrow Refers back to the same direction, engine and cobble sand making machine lube have been in good shape. 4, don't alter the lever, just in case of high-speed crushing chamber causes explosion or low speed impact cobble sand making machine work efficiency.

5, pebble, sand making machine ought to be idle for just two ~ 3 min after beginning, no abnormal feeding again in the evening. 6, try to watch pebble operation situation of sand making machine, feeding wants even, just in case of obstructing stuffy vehicle, don't very long time overload.If find any vibration, noise, bearing and also the body's temperature is simply too high, the phenomenon for example outward squirting material, it's important to prevent the device immediately to check on, troubleshooting rear could work.Cobble sand making machine production efficiency greatly improve production efficiency.