The Advantages of Using Deburring and Chamfering Machines


Since the ancient times, people used traditional deburring tools to smoothen the sharp, ragged edges of the materials before it could be considered safe and perfect for usage. Let’s define what is deburring. In fact, to understand the deburring technology, you must first know what a burr is.

A burr is primarily a sharp edge caused by shearing, drilling or sawing known as the mechanical burr, and another type of burr is created during the thermal process as dross or slag. Both the types of burrs are potential liabilities and dangerous. Hence, you need the deburring machine to remove edges that are dangerous.

Chamfering is another widely known term used in the fabrication industry where making groove or bevel is important. While deburring machines are used to take out the edges and imperfections to make the metal perfect and usable, the chamfering is used to cut symmetrical grooves in the gear teeth making chamfering machines one of the most desired equipment for machine’s functionality.

The chamfering process is also used in making furniture or material that use timber or wood. The timber and wood products with uneven chamfers harm the end user. Hence, chamfering becomes important to maintain the symmetry of the objects.

Up until now, the chamfering and deburring are carried out using hand-held tools like spindle grinder, filing, and brushing. In fact, these are labor intensive work and needs extreme care and attention because the machines can break in between the process unless the machine is of the highest quality.

The gears need to be regularly chamfered and deburred using the highest quality machines that give better control so that you get the much-coveted finish. The following are the reasons of gear deburring and chamfering;

1.     The extra carburizing at the edges of the gear tooth can break the device while it runs

2.     The unpolished burrs can chip out and affect other parts of the bearing and gears

3.     It minimizes the tool handling injuries and the increases the tool life

And this could be only possible with the help of superlative and high-tech chamfer machines. Out of hundreds and thousands of the companies operating in the market, it could be difficult to find the right supplier that can give you the perfect machines.

Firstly, you have to look at the experience of the supplier, ask them to provide the product specifications and other relevant information regarding the machines so that you can choose the right machine. For instance, when you need deburring aluminium parts, you should have the machine that is meant for debussing the aluminum, not something else.

As the fabrication industry grows the need for the deburring and chamfering also increases and in such a market, you have to find the expert suppliers that are experienced in offering a better deburring machine that would eliminate the use of CNC deburring.

So, the carry out the groundwork, find the right supplier and get the perfect machines that meet your requirements and budget. Apparently, only an experienced supplier can do a perfect job.

Sponsor Ads

About WSI S. Innovator   SEO

12 connections, 0 recommendations, 57 honor points.
Joined APSense since, February 4th, 2017, From Hampshire, United Kingdom.

Created on Mar 7th 2018 07:40. Viewed 356 times.


No comment, be the first to comment.
Please sign in before you comment.