Strip Lubricator Minimizes Lubricant Waste And Increase Production

In the past the lubrication process was the biggest headache for engineering manager and manufacturing engineer, they had been experimented for many years with a variety of lubrication methods such as drip systems and pressurized rollers but the problem always comes down to one thing: there is no way to precisely control the amount of oil applied to the material. The difficulty with each of these systems was that the coverage could be uneven, patchy or both. To be sure that the material surface was lubricated, we had to keep it flooded, even if it meant using more oil than it actually is needed. Also traditional methods of applying fluids lubricate only one side of the material and often result in loss of fluid, uneven quality and premature wear of the mold.

With Strip Lubricator all these issues can be overcome. Strip lubricator covers both sides of the material, ensuring that each task receives the exact amount of fluid needed to keep tools and functioning optimally lubricated. Strip lubricator manufacturer, supplier and exporter provide multiple system configurations strip lubricator ranging from simple automated systems to replace manual systems or systems rollers/brushes to more sophisticated systems that are suitable for use with multiple parties.
 
Strip Lubricator Manufacturers, designed and developed strip lubricator to cover the material with a thin, even layer of oil. The oil is applied with valves spray precision air using low volume low pressure to provide a uniform and consistent coverage without excess or dripping.

Valves spray compact are secured within the press between material feed and tooling. The valve operation is controlled by a pneumatic controller which facilitates the operator to adjust quickly and safely the right amount of lubrication for each job, from the outside of the press. Individual flow control knobs on the front of the controller allow the output of each valve is adjusted independently and provide precise control of the amount of oil applied. Benefits of using strip lubricator are:

• Most systems include precise spray control for ensuring uniform and consistent coverage even when working conditions change.
• Accurate placement with minimal spray drift without on implementation results in reduced lubricant consumption reduced downtime for maintenance and increased safety for workers.
• Automatic control on/off switch eliminates drips and leaks that could cause quality problems.
• Wide range of system configurations for use with lubricating low or high viscosity.

As per the strip Lubricator Manufacturers, Suppliers & Exporters, this strip lubrication system is Ideal for following application:

• Lubricating coils
• Thermoformed
• Die lubrication
• Formed
• Lubrication of machines and tools
• Lubricating films
• Lubrication strips formed before
• Print