Residential Architecture Firm Using Revit BIM to Eliminate Project Wastage

by Tejjy Inc CEO

Do you want to eliminate project wastage for your residential architecture firm? 

Are you seeking one of the best residential architects in Washington DC? 

Want to avail of a competent architectural solution from one of the top architecture firms in DC? 

Why don’t you check out the Revit BIM architectural solution provided by the top residential architecture firms in DC, MD, VA & Baltimore areas in the USA?

Some of the best residential architects in MD, VA, DC, and Baltimore areas are using Autodesk Revit software solutions to reduce the project wastage that could have affected the actual construction in terms of time, cost, manpower, and material. 

Let’s delve into how Autodesk Revit is facilitating the residential architecture firm in intelligent 3D BIM Modeling, saving time, and delivering efficiency for the company?

What is the BIM Scope of Work for Residential Architecture Firm?

The BIM scope of work for the residential architectural firm includes:

  • Constructability Review

  • Architectural 3D BIM Model Creation

  • Preparation of Shop Drawings for Architectural Column, Walls, etc. 

  • Conceptual, Schematic & Detailed Design Support

  • Construction Documentation

  • 3D Rendering & 3D Visualization

  • Interior Designing

  • Thermal Analysis

Revit BIM Modeling Stages Undertaken by Top Residential Architecture Firms:

  • Stage 1 - Conceptual Design at LOD 100: 

At this stage, the 3D BIM Model for architectural trade is developed for representing the information at the fundamental level.  The formation of conceptual modeling takes place at this phase. Some of the parameters such as the area, volume, height, location as well as orientation are well-defined at this stage.

  • Stage 2 - Schematic Design at LOD 200:

The stage of schematic design deals with Revit BIM Modeling at LOD 200, where general model elements are created with accurate size, shape, quantity, location, and orientation. Non- geometric information also gets attached to the model components.

  • Stage 3 - Detailed Designing at LOD 300:

This is the stage of accurate BIM modeling and shop drawing creation where the residential architectural elements are well-defined with specific assemblies, comprehensive quantity, size, shape, location, and configuration. At this phase, the non- geometric information gets attached to the elements of the Revit model.

  • Stage 4 - Construction Documentation at LOD 350:

Here the model details represent the building elements interface with other building elements through graphics and written definitions.

  • Stage 5 - Fabrication & Assembly at LOD 400:

At this stage of Architectural Revit Modeling, components are created as precise assemblies, with comprehensive information on fabrication, assembly, and detailing besides specific quantity, shape, size, location, and orientation. Further, non- geometric information can be attached to the model elements.

  • Stage 6 - As-Built BIM Modeling at LOD 500:

At this juncture, building elements are modeled as constructed assemblies for construction maintenance and operations. Besides, being accurate in size, shape, quantity, location, and orientation, non-geometric information is included in the modeled elements.

BIM Simplifies Work for Residential Architecture Firm in DC, MD VA & Baltimore through:

  1. Resolving Input Challenges: BIM facilitates finding inconsistency in the input drawings.

  2. Detecting Incomplete Information: BIM enables the accurate positioning of architectural walls, floor drains position & variable slopes on slabs by detecting inaccurate details provided in the architectural floor plan. 

  3. Identifying Constructability Issues: If there are some conflicts between Architectural & Structural trades that could affect the actual construction in terms of cost, time, manpower and materials, Architectural Revit BIM Modeling helps to minimize the wastages.

  4. Coordinating Design Issues: Autodesk Revit BIM helps to identify clashes of the top residential architecture firms and take them to the consultants, resulting in design revisions. Some of the issues identified in the architectural construction drawings and resolved through BIM drawing validation include the clash between pipe & supply air duct, the conflict between the crash wall & upturn beam, etc. 

BIM Value Addition for Residential Architecture Firm:

Revit BIM helps residential architecture firms to plan 3D model and allow the team to plan, and coordinate project design, construction, and maintenance. Further, Autodesk BIM detects constructability problems at the pre-construction stage through clash detection, thus evading work stoppage, rework, and waste of material, labor and time.

To know more about BIM adoption for Residential Architecture Firm in DC, MD VA, and Baltimore areas, consult Tejjy Inc. – an Architectural BIM Engineering Company at 202-465-4830 or

Sponsor Ads

About Tejjy Inc Advanced   CEO

41 connections, 1 recommendations, 265 honor points.
Joined APSense since, September 19th, 2019, From Maryland, United States.

Created on Aug 9th 2020 23:51. Viewed 1,395 times.


No comment, be the first to comment.
Please sign in before you comment.