Repairing a Samsung LCD TV Using a Samsung Lcd Power Supply Repair Kitby amelia b. Seo writer
Now that you have your Samsung LCD TV, it is probably time to start thinking about how to fix your unit. The first thing that you are going to have to do is to make sure that all of the connections on the back of your television are secure. This means that you need to take all of the power supplies apart. It is recommended that you remove the power supply from your TV before you start troubleshooting. It is possible for you to take all the screws out, but this can be dangerous as the screws on the back could come loose. If you do not have the proper tools, it is also a good idea to contact a professional to ensure that your work is done properly.
After that, it is time to troubleshoot the Samsung LCD TV itself. The first thing that you are going to have to do is to locate where the capacitors are. These are actually located on the bottom of your television. The first thing that you will have to do is to locate the ones that are damaged and replace them with new ones.
The next step is to turn your television off. In order for you to do this, you need to unplug the power from the back of your TV. Once you have turned your television off, the next thing that you are going to have to do is to remove the power supply from your TV. At this point, the next thing that you will have to do is to locate the capacitors. These are found in the bottom of your screen and the ones that are damaged will be replaced with new ones.
Now, the next thing that you have to do is to place the cap of the power supply over the terminals. The terminals are what will allow you to hook up your Samsung LCD TV to the DVD player or your video game console. The other part needed in order for you to complete this repair is the screw driver. You need to find a Phillips screw driver in order to complete this repair. If you are unable to find a Phillips screw driver, you can use a flat head screw driver as long as it is compatible with the type of Samsung LCD TV that you are trying to repair.
Once you have replaced the four capacitors with new ones, you can now start to repair your Samsung LCD TV -relay clicks. Start by uninstalling all the software from your computer. After that, you should uninstall any device drivers that were installed in your system. If you did not install any device drivers, you should be able to locate them on your PC by using the Device Manager. After that, you need to restart your system and then, you should click Start > Control Panel in order to update the latest drivers in your system.
The next step that you need to do in order to repair your Samsung LCD TV -relay clicks is to replace the four capacitors that are damaged with new ones. After you replace the new capacitors, you can put them back into their corresponding slots in the power board. You also need to connect the reset switch to the positive on the cap that is of the left and then the negative on the cap that is of the right. Finally, you need to place the batteries back in the TV set and then, you should turn the power back on.
The fourth step that you have to do in order to repair your Samsung LCD TV -relay clicks is to remove the old capacitor from the TV set. Start by removing the capacitor with the help of an opening tool that has a small opening for you to push the new capacitor. After that, you have to place the opened capacitor in the corresponding slot in the power board. Now, you have to connect the positive cap of the new capacitor to the positive on the power board and then the negative to the negative on the cap that is of the left. Finally, you need to connect the reset switch to the positive on the cap that is of the left and then the negative to the negative on the cap that is of the right.
The last step that you have to do to repair your Samsung LCD TV -LCD power supply repair kit is to connect the screen to the inverter. In this case, you have to use the splitter connection that can be found on the back of the inverter. Then, you can plug the screen into the inverter in order to make the DC voltage equal to the AC voltage. Finally, you can connect the monitor back to the old television that you want to repair. To finish it all, you should turn on your television set and then wait for a few minutes.
Created on May 8th 2021 07:45. Viewed 308 times.