Repair blue screen and restarting automatically restore errror on iPhone 5s
You don't know why iPhone 5S displays blue
screen and reboots automatically and it cannot be rooted. It's really
frustrating. Don't worry, Vipprog can uncover the truth for you.
Generally, iPhone 5s reboots after
displaying a blue screen because PCB under screw holes disconnects of
because of U6 chip. The material object location of U6 chip is shown in
picture 1-1. Use multimeter to measure the diode data of the chip signal
and it is normal, so is the voltage. Therefore, the chip is damaged. Replace a
new U16X chip and the phone is repaired.

1-1
If you need re-programming the U6 chip, MJ
ACT PLUS tool is useful tool, MJ ACT PLUS baseband eeprom ic test
fixture, stay-in-place Baseband eeprom IC on iphone motherboard, Support 4S, 5.
5C/5S, 6, 6P, 6S, 6SP all iphone model CHIP, Erasing / Reading / Re-writing /
opening CHIP (Baseband eeprom IC)data, check CHIP good / bad status, erase
& format chip.
Hope this short guide can help you and if
you have any problems can concult Vipprogrammer.
Post Your Ad Here
Comments