Quickly 4C/4D/46/48 Code Reader Chip Transponder Auto Key Programmer V2.14.8.16 for sale

Quickly 4C/4D/46/48 programmer V2.14.8.16 can copy 4C,4D,46 Chips quickly, stably and accurately. Quickly 4C/4D/46/48 Code Reader Chip Transponder is same Functions as original CN900 & ND900, while much cheaper in price. Now we have Quickly 4C/4D/46/48 V2.14.8.16 Auto Key Programmer for sale.

Buy it for 8 reasons:

1. 3.5-inch TFT LCD Touch screen with built in battery, can work without additional power supply, portable and convenient.

2. Read chip quickly, stably and accurately.

3. Do not need to connect the computer copy 4C, 4D, 46

4. Support copy 4C, 4D chip (TPX1, TPX2, EH2, TK40…)

5. Same Functions as original CN900 & ND900, while much cheaper in price

6. Battery operated

7. Can read TOYOTA H Key

8. Same function as CN900 Key programmer but with cheaper price.

Instruction for Using:

1. The external interface as show in following picture:

2. Identify the chip

Put the chip into the chip read area and click "chip reading and writing". If there is a chip, the corresponding chip and parameter will be displayed, as show in following picture:

3. Copy the chip

For examply: copy the chip 42. Firstly, put the key that can start the original car into the chip reader area to read data, as show in following picture. Then decoder, remove the key of original car, put into the new chip 42, click "copy", as show in next picture--OK!

4. Additional settings

For example: in order to generate the chip 4D67, we first put a blank chip 4D60 into the chip reader area and then click "additional settings"--"key cutting", as show in Fig.(6)---click 67, as show in Fig(7)---generate data---done, as show in Fig.(8)

5. Identify whether Toyota smart key has been used or not

For example: put Toyota smart key into the chip read area and click "additional settings"--- reading of "smart key", it will show you it is new or used.

6. Detect the frequency

Put the key of the remote controller into the frequency detection area in a flat manner, and click "frequency detection" in the menu; then, press any key of the remote controller, and corresponding frequency, ID, modulation mode, speed and other parameters are then show on the screen.

This article is compiled by http://www.autodiagnosticobd.com, if you have any advice on it, pls feel free to contact Autodiagnosticobd - China Autodiagnosticobd Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.