Pro Steps to Follow for Repairing Leakage of Poly Water Tank

by Eva Spenser Innovation

Polythene water tanks are quite strong, but they can be developing leaks quite often due to harsh weather conditions. Also, there can be some other possible reasons that can cause damage to your poly water tank. If there is a leak in your poly tank, then you can opt for fixing the damages portion by following some effective steps.

Given below are the pro steps that you can follow for fixing the leakage on your poly tank:

Step 1: Drain All the Water from the Tank

Your first step for the poly water tank repair will be to drain out all the water from it. Make sure you pour the water at least below the cracked portion of your tank.

Step 2: Clean the Tank

Next, you need to clean the area of the tank, which needs to be repaired by using soap abs water. Prior to repairing the tank needs to be cleaned properly and free from any oil, paint and grime.

Step 4: Preheat the Affected Area

You need to preheat the cracked area with a heat gun or propane torch. Take a bigger portion than the damaged one for heating, so that you can make sure to have even distribution over the entire crack.

Step 5: Apply Some Filler Material

You can use a small strip of polythene materials that work as fillers. Place the filler materials over the crack and continue to heat the repaired area with the heat gun. Move the materials slowly and carefully to the cracked area, so that it can completely fit and cover the area. Smoothly apply the molten plastic with a putty knife so that it fills the entire area. After fitting the area properly, cut out the excess portions of the plastic with the utility knife, if any.

Step 6: Test the Tank

After you have completed the repairing process, it’s time to test the tank. Re-fill the tank with water and check for any leakages. If you see that the water has stopped leaking, then great, you are successful in repairing the leakage. However, if the water is still leaking, then repeat the process all over again, or call for professional help.

Why Opting for Professional Repairing Service is of Great Help?

The DIY steps can be difficult to perform, and you might have to opt for several attempts, which will cause issues in your water storage. Thus, the best way to resolve the issue is by opting for hiring professional water tank repair in Brisbane. A skilled poly tank repairing expert will use effective techniques for repairing the tank. Also, hiring professionals will not save your time, which you can invest in other productive works or spend it with your family.

Last Verdict

Therefore, these are some of the pro steps that show how to repair plastic water tank leakage. However, even after following these steps, if you fail to repair your poly tank, then it is better to opt for hiring a certified water tank repairing service, as they can fix the leakage more effectively and save your time.