Printer Driver Setup Using The HP Printer Assistant

What is HP Printer Assistant?

Why Use this. HP Printer Assistant is a printer management software installed with your HP Windows printer driver. With it, you can scan documents and photos, make supplies, check ink levels, and more. For more information about HP Printer Assistant, see these FAQs.

HP Printer Assistant is a Windows software program for HP printers that is installed on multiple printers. Use the HP Printer Assistant to verify the scan, order supplies, ink levels and more. When you open HP Printer Assistant, the printer configuration software window will appear after you upgrade your computer to a new version of Windows. The printer icon will not be available in the Devices and Printers folder, even if your printer settings and window are updated. You can reset the printer connection or reinstall the HP Support Assistant For driver to resolve the problem. Follow the procedure below to configure the printer driver.

Connect a printer:

You can access the printer accessories by reconnecting the printer and connecting a new printer. When prompted, select the type of connection and follow the on-screen instructions to configure the printer. Click on the red screen X and try again if the connection fails, then continue with the next step.

Turn off the printer by pressing the power button. Restart the computer and the printer. Open the HP Printer Assistant.

If the printer wizard opens, the problem is resolved. Otherwise, go to the next step when you see the red X screen and the connection fails.

Uninstalling the HP driver:

You must uninstall the HP printer driver and software before reinstalling the current version of the driver. If you have connected your printer and computer with a USB cable, disconnect the USB cable from the printer. Click on the name of your HP printer in the list of installed programs and click the Remove Device .Follow the instructions on the screen and restart the computer to completely remove the software driver.

To reinstall the latest driver:

Download and install the current version of the software driver from support.hp.com. You can use the installation CD that came with your printer as an alternative method. Check if the CD contains the driver for your version of Windows.

Turn on the printer and disconnect the USB cable if you have one. Go to https://support.hp.com/drivers. You can download the full function driver or the original driver just by clicking search and follow the instructions to go to the download page.

You can download the full function driver or the original driver simply by clicking download. It is recommended to download the full function driver.

Restart:

After reinstalling the driver, you must restart the computer and the printer to complete the window setup. Turn off the printer. To restart your printer, close all programs running on the computer and restart it. Switch to printer, open HP Printer Assistant.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Nov 30th 2019 04:45. Viewed 566 times.

Share on APSense

Comments