Plastic Injection Moulding Method for Automotive Parts Moulding

by Jacob Williams Hqmould - Plastic Mould Factory

Introduction

Plastic mould manufacturer uses different types of methods for making moulds. The injection method of moulding is a common and popular moulding producing process. Injection method is widely used by the mould makers’ worldwide. Major industries like automotive, pipe fitting, etc use moulds for manufacturing different parts.

Automotive parts moulding is mainly produced by adopting plastic injection method moulds. Depending on the component of car manufactured mould makers determine the technique used for moulding. Though other methods are adopted for moulding like a rotational, blow, etc, the injection method of moulding is still preferred highly.

Pro’s of injection method of automotive parts moulding

Plastic mould manufacturers prefer injection method for the following advantages:

1. Flexibility in using different material

No doubt that plastic is a widely used material for making moulds. But under the injection method, different types of materials like rubber, metal, and glass also can be used for shaping and production of moulds. The only requirement of the injection method is that the material should be able to be pelleted and have enough viscosity to flow through the equipment. Hence, auto parts of different materials can be produced through the injection method.

2. Injection method gives importance to details

Automotive parts moulding are complicated in design. The shape, size, and texture of auto parts vary from vehicle to vehicle. A lot of modern auto parts include thin walls, thick walls, rigid corners, protruding edges, sharp cuts, and other design features. For the precise production of these parts, no other method can be used than the injection method of moulding.

3. Offers quality auto parts

The value of an automobile is measured in terms of quality used in manufacturing its parts. Further, the vastness of the industry is continuously changing with time. So, it is vital that quality auto parts mould is manufactured to serve the customers and stay in the competition. Injection method of moulding guarantees quality and consistent production of automobile parts.

4. Fast production of auto parts

The automobile manufacturing industry is one of the biggest sectors in the market. The industry is quick-paced with changes daily. The industry needs to produce car parts quickly and assemble them. The injection method of moulding provides fast production of auto parts in comparison to another method of moulding.

In Conclusion

Exploring different options for the production of auto parts is quite common among new customers. But experience has shown that the plastic injection method of moulding is best for producing a fair share of car parts. HQ Mould in China specializes in making auto parts moulds and has extended its services to worldwide. Some of the moulds made by HQ moulds are bumper, glove box, door trim, etc.