PAINTING: HOW TO COVER BRIGHT COLORS AND DARK COLORS

The New Year is a period of change. At this moment of transition, many people decide to change some aspect of their lives to test new things and change their style.

This is often reflected in home, as trends in this area are changing rapidly. As for the color of the walls, you may have decided last year  to experiment with a shade of dark red on your walls to try the rustic decor . After a few months, it may be that this color does not suit you anymore! 

This year, you may be looking to transform the room by applying a lighter, more modern shade. But how do you go about covering a dark color or a bright color with a light-colored paint? In the following paragraphs, we will present the steps to follow to get good results without it being too complicated!

Here's how to camouflage bright colors and dark colors

The first steps

If you've ever tried painting over dark colors, it's likely you'll know how complicated it can be. Indeed, if we do not follow the steps as it should, when the paint dries, the dark color can show through, even behind several layers of pale paint. This is why surface preparation is highly important. Specifically, you will need to choose a filler-primer and stain-blocker.  

Start the process by measuring the surface you intend to cover, as this will allow you to determine the amount of paint and primer needed for the job. This can be done by multiplying the length by the width of your wall, taking into account the total area of ​​the space.

Divide this figure according to the area of ​​coverage of your primer and the new paint. This coverage area varies from one product to another, so be sure to get to your hardware store with all the measurements.

After picking up your primer and paint, clean the area by removing dust and debris from the corners of the room and around the floor. If the walls have been stained or appear to be soiled in any way, it is essential to clean them before applying a new coat of primer or paint. If you wash them, make sure they dry completely before proceeding to the next step.

Before opening the primer and paint cans, move all your furniture in the center or outside of the room. Cover the floor with clothes or rags to prevent drops from falling on other surfaces. Also remember to remove any projecting or glued objects, including nails, hooks or exit covers.

Do you have a painting project to renew the interior of your home?

Subsequently, depending on the conditions of your walls, you may have to start by removing traces of old paint, especially anything that peels or flakes. This should be done carefully with a paint scraper. Also try to see if you find rough sections on the wall and use a fine-grit sandpaper to smooth them. If you find cracks and holes in the walls, including holes created by nails, fill them with joint compound.

Remember that if you complete one of these jobs, the walls will also need to be washed before painting. This is due to the fact that the sandpaper leaves small traces of dust, thus compromising the quality of your new coat of house painters west auckland.

Prepare the surface of walls for painting

For slots around window and door frames or any other space creating an opening in the surface, please apply some caulking. For consistent application, hold the caulking gun at an angle and follow the slot down to the floor. Be sure to gently squeeze the gun and, with a damp finger, smooth the sealant every other foot.

Keep a damp cloth handy and wipe off any excess. Make sure you fill in all the slots before brushing! Also, allow the putty to dry before continuing. It should be mentioned that in some cases it will not be necessary to complete this step, but it will give your walls a nice finish!

Here is the time to apply the primer and paint! Dining room white walls

We recommend using a little of the new paint to tint your primer. This will give you better coverage to hide the dark paint. Pour a portion of the primer into a paint tray and using a conical brush, start at the perimeter of the wall you are covering. The brush should be used for areas of the wall that are hard to reach or that you can not cover with a roller.

Once you have covered the hard-to-reach areas with your paintbrush, start using a roll that fits the needs of your walls, whether smooth or textured. Roll up the primer taking care to create an even layer, going back and forth in a grid pattern for best results.

Allow the primer to dry completely before applying your paint. Follow the same methods to apply the paint on all parts of the wall, applying two coats of paint to cover your color too bright or too dark!