Nice price Wifi Piwis Tester 2 with Panasonic CF30 plus V18.10 Full set promotion!!

PIWIS II the wifi solution is 100% OEM as dealership ones, you can choose both USB (LAN) connection and Wireless (WLAN) function, also the wifi singal is really strong, which over 30 meters. what more, we also will add free one Wireless Router to stronger your singal with wifi Piwis tester 2.Please NOTICE, the PCB we use Samtec PAN scheme not J2534 one!

A prerequisite for using wLAN is the availability of a suitable infrastructure. The workshop safety
guidelines must also permit the use of radio networks.
Connect the VCI to the PC using the supplied USB cable and start the VCI configuration software.
This can be accessed via the relevant link in the basic software.
The necessary setup steps are described separately in the section entitled wLAN configuration.

In order to establish a wLAN connection, the USB connection must be removed once configuration has been completed successfully.
This is because once established, the USB connection is always active.

Only use IP addresses approved for local operation (e.g. 192.168.x.x) in the local wLAN/LAN
Example:
Network: 192.168.1.0, subnet mask 255.255.255.0
• Addresses that can be used: 192.168.1.1 up to 192.168.1.254
• Router address (gateway): 192.168.1.254
• Client addresses (e.g. VCI, laptop): 192.168.1.1 up to 192.168.1.100 (max. 100 participants)