New Arrival VVDI V3.5.2 VAG Diagnostic Interface Update Online and Open Read Pin/CS / MAC Free

2015 latest VAG VVDI interface has updated version 3.5.2 .It is the newest VAG Vehicle Diagnostic Interface VVDI .

1. Latest Version: V3.5.2
2. Update Online
3. Operating System: Win7 and XP
4. The VVDI IMMO Plus V2.7.6 Includes the VAG Commander and Tag Key Tool Software. You Don't Need to Reinstall These 2 Software Separately Anymore
5. Powerful Function Tool for VAG Vehicles, Especiall Key Programmer and Mileage Correction.
6. Add Component Protection Function Since V2.8.2 Version

By now ,the new version VVDI has added more powerful functions.

The follow list :

1.    Support NEC 24C32, NEC 24C64 change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
2. Support GOLF5 MM7(9S12) change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
3. Add TA special chip pre-program. Directly pre-program ID48 to TA2,TA3, TA4, TA5 chips.

Function:

1) Extracting security access codes (PIN) by OBDII
2) Programming keys by OBDII. Preparation of dealer's keys.
3) Mileage recalibration by OBDII
4) Clearing crash data DTCs by OBDII
5) Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6) Exchange speed limit of MMI-TV system

Standard Diagnostic Functions:

1) Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
2) For all electronic control units reading identification data
3) For all electronic control units read error (DTCs)
4) For all electronic control units clear error (DTCs)
5) Scan all units
6) Broadcast requests
7) Measured values
8) Adaptation