limestone Jaw Crusher in Philippines
Composition framework:
Jaw crusher main structure frame, eccentric shaft, big belt pulley, flywheel, side guard, elbow board, elbow boards back seat, adjusting screw gap reset spring, fixed jaw plate and movable jaw plate.
|
working principle:
When the jaw crusher motor-driven belt and pulley, through the eccentric shaft to move the jaw up and down movement when moving jaw rises between toggle plate and moving jaw angle larger, thus promoting the moving jaw plate close to the fixed jaw plate, and this at the same time the material is squeezed, rubbing, grinding, such as multiple broken; when moving jaw downlink, between toggle plate and moving jaw angle smaller, movable jaw plate leave the fixed jaw plate under the action of the rod, the spring has been pulverized material under the action of gravity, the lower part of the jaw cavity free discharge spout. Thus the work of jaw crusher is intermittent, grinding and unloading process in the jaw cavity alternately. With the continuous rotation of motor broken motor jaw periodically crushed and nesting to achieve mass production.
Operating sense:
Jaw crusher due to improper use often leads to the phenomenon of death crusher, therefore, the material for crushing, they must pay attention to pay attention to the uniformity of cutting, there is the hardness of the material was suitable, if perfect, you can coupled with a process.
limestone Jaw Crusher in Philippines
Post Your Ad Here
Comments