Laser Cut Exhaust Flanges Available Online: Don’t Play With Quality

Exhaust flange is a small but critical component of the exhaust system; it is used to connect the tail pipe and tubing with manifold to provide a smooth path for the hot gasses to go out. As it also comes in the contact of hot and greasy gases, so, it tends to deteriorate over the years. It is a common spare of exhaust systems and doesn’t cost much; still, buying the best exhaust flange kits needs attention to numbers of aspects like material, thickness, fitting, shape, edges, hole sizes, numbers of holes etc.

Parameters That Fix The Suitability Of Laser Cut Exhaust Flanges:

The collar of flange has 3-4 holes spaced differently to suit the different requirements in different models; these holes and their position should match with the holes of exhaust manifold. There are five important parameters that decide the suitability of laser cut exhaust flanges: internal diameter, height, width, bolt circle and thickness. Internal diameter is the diameter of holes on manifold. Height of exhaust flange describes the flange’s outer end at narrow side. Width describes the flange’s outer end at the narrow side. Bolt circle is the diameter of the circle around the bolt holes. Thickness of flange is a precise parameters; you need to optimize the size. Too thick and too thin both may not work well to support the efficiency of exhaust system. Flanges with 50, 63 and 76 mm internal diameter are more in common to fit with range of models from different brands. Wholesalers Canada, US offer wide range of exhaust flanges with different bolt circle’ diameters.  The width and height are relatively less important because of being compatible if the other dimensions match. In case, your vehicle’s exhaust system is designed with oval shaped flanges, then, you need the particular flange from the authorized dealer for that brand because these are rarely used. 

Next critical consideration while buying the hardware laser cut flanges is material. Cheap quality steel flanges are easily available at very low price but these are more prone to rust besides having poor tensile strength. Stainless steel exhaust flanges are better corrosion resistant but these are slightly costlier. Aluminum flanges are also available. Which one should you use? Use the exhaust flange of same material as of exhaust system.

Wide Range Of Exhaust Flange Kits Available Online:

Prominent Wholesalers Canada, US offer exhaust flanges under variety of categories to ease down the searches of buyers. Hardware Laser Cut Specific Flanges, Hardware Split Laser Cut Flanges, Hardware Individual Flanges, Hardware Flange Laser Cut Kit and Laser Cut exhaust Bulk Flanges are few to name common categories.  LASER CUT Flanges for Ford, Honda, Rover V8, Dodge and Peugeot like prestigious variants are made of superior grade 1018 cold rolled or stainless steel. Although exhaust flange doesn’t contribute in engine’s performance or mileage directly, still, the flange replacement doesn’t allow playing with quality.  

About The Author
Author here shared information of Exhaust Flange Kits that are available online. Going with the quality mufflers products benefits most than looking forward for the cheaper price. Therefore it is essential to go for flange from the authorized dealer as these are rarely used.