Kitchen Remodeling: 8 Common Steps of a Typical Remodeling

Kitchen remodeling is getting popularnowadays but in spite of its fame, there is one thing that matters a lot; the craftsmanship and the quality of work put into play by the remodeling contractors. It is therefore significant that you have a prior understanding of the type of work that they will be doing on your kitchen before you hand over the work to them. Ideally, the procedure that the remodeling contractors performinclude demolition, electric work, framing, plumbing, installation, dry wall, floor and tile setting among other activities.

What steps are usually followed during a typical kitchen remodeling session?

Step 1: Building plans for the kitchen renovation

Your kitchen remodeler is required to come up with plans related to the structural, plumbing, electrical and mechanical styles because there are different permit requirements for every kitchen. You can make a confirmation of these elements by requesting outside engineers to review what your remodeler has done. The main purpose of this step is to convert the renovation designs of your kitchen into construction documents. The documents have to be submitted so that the construction permit can be approved as an issuance of the final approval.

Step 2: Ensuring safety and cleanliness for your kitchen remodeling

Kitchen remodeling is very hazardous especially if children are present. Some of the equipment used in remodeling include: wires, nails, and studs etc. which are lethal. Moreover, there are instances when the work can get messier and at that time, you have to ensure that you maintain a very clean environment and build up barriers or “no go zones” that will prevent children from being injured.

Step 3: Demolition and framing

Before remodeling your kitchen, there are items that must be disconnected like electric, water and gas lines. Modern Kitchen Cabinets Los Angeles, counter tops and sinkshave to be removed. One critical thing in this stage is the room squaring which could be very complicated if the remodeling process is only a small part of the general project. Make sure that the remodeler is very careful because it is a very fragile stage.

Step 4: MEP: Mechanical, Electric and Plumbing

At this point, you will be done with issues that concern permits, demolition and framing of your kitchen which is always carried out by the general craftsmen. MEP is usually carried out by the trade contractors and the task of the designer is to ensure that all workshave been done according to what you initially agreed on.

Step 5: Bringing building inspectors

Building inspectors are brought to ensure that everything is carried out in accordance to the building codes. Close stickers are also issued at this point so that the job can be continued as planned.

Step 6: The kitchen remodeler’s duty

Your kitchen remodeler is responsible in this step because he will be required to insulate, drywall the open walls and make the foundation of the floor. After that, he will install other kitchen appliances and cabinets in their right place; which is followed by trimming of the carpentry items and then painting.

Step 7: Substantial completion

The plumber will install the faucet and connect all the appliances whereas the tile setter performs his function of setting the kitchen backlash tiles. At this point, the electrician will also be required to install the light fixtures and other device plates.

Step 8: Begin to enjoy your new kitchen

On completion of the remodeling process, your designer will take you through the maintenance requirements and guide you on how to install and use all the appliances.

The rest is up to you, enjoy your new kitchen and ensure that your kitchen is always attractive!

About Author

Kitchen Remodeling Orange County is getting popularnowadays but in spite of its fame, there is one thing that matters a lot; the craftsmanship and the quality of work put into play by the remodeling contractors.