Articles

Is Emission Stage Important for Diesel Generator Set

by Starlight Generator dieselgeneratortech

Emission stage is a standard indicating that emission standards for exhaust gas pollutants. The European standard is a reference for diesel engine emission standards. At present, diesel generator set will mark the European standard of engine exhaust emission. Such as European stage II, stage III, stage IIII etc. In generally, the emission standard requirement is Euro stage III emission standards or ECE R96 stage III A or higher than these standards.

 

If exhaust gas emission can not meet the standard, maybe there is harmful to human body and environment.

 

Diesel engine exhaust gas is one of the main sources of environmental pollution, the exhaust gas from diesel engine contains gaseous, liquid and solid pollutants. Gaseous pollutants contain oxides, organic nitrides and sulfur-containing mixtures, etc. Liquid pollutants contain H2SO4, HC, oxides, etc. Solid pollutants include hydrocarbons, such as carbon, metals, inorganic oxides, sulfates and polycyclic aromatic hydrocarbons (PAH) aldehydes.

 

CO is a colorless odorless gas produced by incomplete combustion of diesel oil. HC is also the product of diesel incomplete combustion and cylinder quenching. NOx is the general term for NO2 and NO. Both of them are nitrogen combustion products produced by excessive air and high temperature during combustion. NO is oxidized to NO2 in the air. NO2 is reddish brown and has a strong odor. Particle matter (PM) is a visible pollutant in the exhaust gas. It is composed of carbon pyrolyzed in diesel combustion, unburned hydrocarbons, sulfate produced in engine oil and diesel fuel combustion, etc. It is also the common black smoke emitted from exhaust pipe. The main pollutants emitted by diesel engines are NOx and PM.


When CO enters the human body through the respiratory tract, it will combine with hemoglobin, destroy the oxygen exchange mechanism in the blood, make people hypoxia and damage the central nervous system, cause headache, vomiting, coma and dementia and other consequences, and even cause CO poisoning in serious cases.


PM can cause chronic diseases, such as asthma, bronchitis and emphysema after being absorbed into human body, and PAH and other organic substances adsorbed on soot particles are extremely harmful carcinogens.


Therefore, we should control exhaust gas. How to control?


With the implementation of diesel engine of generator set for non-road use and three-stage diesel engine emission regulations, two-stage and three-stage Ricardo diesel engines have been put into use in the market. The requirements of use for Ricardo two-stage and three-stage emission standard is different from past low standard emission standard of diesel engine.


So how to correctly choose and use diesel oil? As follows:


1.We should choose certified Ricardo diesel generator set or other certified generator brands.

 

2.Choose diesel oil which has passed Euro two-stage and three-stage standard or higher standard.


Because it is difficult for most users to distinguish the quality of diesel oil, it is recommended that users choose the diesel oil provided by the supplier or local diesel oil stations that meets the Euro emission stage III and more national standards.


When the fuel system fails, the problem maybe that the diesel oil has been consumed. Detecting the remaining diesel oil in the tank can not fully explain the cause of the failure. But from the failure parts, such as oil pump, high pressure oil pump, pump nozzle, injector, etc., we can basically infer the actual use of diesel oil before.


The use requirements for diesel oil:


1.When adding diesel oil, attention should be paid to precipitation and cleanliness, so as to avoid secondary pollution caused by on-site tanker or tanker transshipment.


2.Before use, we should check and discharge the sewage from daily fuel tanks, diesel water separators or pre-filters. If abnormal conditions are found, we need to take measures.


3.It is recommended to replace diesel filter element, oil-water separator filter element and pre-filter element every 250 hours or every 12 months, whichever comes first.


4.Replacement of properly marked diesel oil according to ambient temperature.


The choice of diesel oil standard. It is recommended to choose the diesel oil which reaching to Ricardo diesel engine emission standard.


The use requirements of lubrication oil:


1.When adding or replacing lubricating oil, pay attention to cleanliness and avoid secondary pollution.


2.Before use, oil level should be checked and recorded. If abnormal oil level is found, should report to the generator manufacturer in time.


3.Regularly every 250 hours or every 12 months replace lubricating oil, oil filter and bypass filter.


4.Replace viscosity diesel oil according to environment.


If the generator manufacturer has special requirements for the maintenance cycle, please follow the guidance of the generator manufacturer.


All Starlight series Ricardo diesel generators and other diesel generators have certificates, such as ISO, CE and quality system certificates etc. And before delivery the generator set, we also test, then provide test report. So if you have purchase plan of diesel generators recently, welcome to contact us. We believe our product quality and service can meet your requirements.


Sponsor Ads


About Starlight Generator Senior   dieselgeneratortech

135 connections, 3 recommendations, 516 honor points.
Joined APSense since, April 16th, 2017, From Guangxi, China.

Created on Sep 27th 2019 04:13. Viewed 154 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.