Articles

Installation of SSD in HP Notebook is Very Easy Way to Increase Its Performance

by Wbic Info Assignment help Australia
This is not important that your HP notebook is very old or innovative; upgrading SSD will increase its performance.   Along with speed increase as high as 250 % on the multiple tasks will certainly increase the work performance of your computer system, unlike other mechanical drives which uses small metal head rolls on the magnetic platter.

What do you require?

To install SSD in your HP Notebook and transfer the files over it, you must need external drive enclosure, a Philips screwdriver and disc cloning software which permits you to connect the data.  If you have any question regarding this process, you can take online HP technical support from certified technical experts. 

Check Your Data carefully-

If you have SSD, software, enclosure, you are about to begin upgrade, although before you put hand on screw driver, you should ensure that your hard drive does not have extra space in use, your SSD can hold. Once you make sure that you have a space, you should follow given below steps:-

Step 1:- 

You need to put your SSD into the enclosure.

Step 2:- 

You have to connect it through notebook’s USB port.

Step 3:- 

You should launch “Acronis Migrate Easy” button and choose Clone disk.

Step 4:- 

Choose external drive as a destination disk and click “next” option and OK couple of times, if this is asked whether you wished to eliminate or partition a disk, Say “YES” button and your computer system will reboot and will take twenty minutes to an hour to copy the data.

Step 5:-  

Turn of the notebook once cloning procedure finishes and disconnects it to the power. Now, you need to remove SSD from enclosure and keep it in a safe place.

Step 6:- 

Next, you have to open the hard drive upgrade panel of notebooks and clasp it in one place. Generally, the upgrade panel lies in the foot of notebook, although in some notebooks, this lies on the side of framework. Check user manual carefully if you are not able to locate the panel.

Step 7:- 

Switch mounting bracket old hard drive to new SSD.

Step 8:-

You need to boot to test SSD, if this does not detect the drive, renew it and confirm that SSD is connected to SATA port. If drive is attached but has no OS, you have to repeat the cloning procedure. Finally, you need to put old drive to the enclosure and connect it to the notebook and use as a backup drive. For any technical query, you can call at HP technical support phone number 1-888-657-9666 for quick responses.


Sponsor Ads


About Wbic Info Advanced   Assignment help Australia

113 connections, 2 recommendations, 485 honor points.
Joined APSense since, April 5th, 2017, From Sydney,Australia, Australia.

Created on Jun 14th 2018 08:40. Viewed 277 times.

Comments

No comment, be the first to comment.
Please sign in before you comment.