Installation Instructions for 2013.3 AutoCom Delphi Software (Cars)

how to activate and crack 2013.3 AutoCom Delphi Software (Cars), These Installation instructions are for Chinese AutoCom CDP or CDP+ and delphi Diagnostic VCI

Step 1:

Don’t plug AutoCom USB cable into computer yet. We’ll tell you when to do it.

Go to DVD disc, and double-click on file: DSCars_HeavyDuty_R32013

On next screen, select “DS150E” as seen in below picture…

Select what country you live in.

Click “Next”…

Leave “Destination Folder” intact as seen in below pic. DO NOT change the path. Just click on “Install”.

Let install complete. Then go to Step 2 below…

 

Step 2:

On the DVD disc, go to folder: Delphi 2013.3\patch

Or just “patch”, whatever the combination on the disc.

Select/highlight all files inside “patch” folder, right-click “Copy”. Or press Ctrl+C

 

Step 3:

Go to folder where you installed AutoCom software.

If you left “Destination Folder” intact during installation, then go to this directory:
C:\Program Files (x86)\Delphi Diagnostics\DS150E

 

Step 4:

Right-click anywhere on white space, and click “Paste”. Or press Ctrl+V.

It’ll ask you if you want to overwrite the files. Choose “Yes to All” as seen below.

 

Step 5:

On the DVD disc, go to folder: Delphi 2013.3\keygen

Or just “keygen”, whatever the combination on the disc.

(If you don’t have it, you can download it here.)

Double-click on: Autocom-Delphi Keygen 2013.3

Leave it running.

 

Step 6:

Launch AutoCom from your computer. There should be a desktop icon called: DS150E

Looks like:

 

Step 7:

When you get to this screen:

…go back to Autocom-Delphi Keygen 2013.3, and enter your device Serial number inside “Serial” field as seen below:

You’ll find the serial number on a sticker that came with your unit.
Or inside “Read Me” file on the disc. It’s the one for “Cars”. (Ignore
“Trucks” unless you want to scan trucks, buses, vans and purchased the
trucks cables).

Also, tick “Delphi” as seen in pic above.

Press button “Get HWID”.

Then copy serial into “Serial Number” field. And HWID into “Hardware key” field as seen below…

Click on arrow to continue.

 

Step 8:

When you get this show up:

Click “Yes”.

Then browse to your Desktop, and save the file “FileActivation” there.

 

Step 9:

Go back to: Autocom-Delphi Keygen 2013.3

And click on button: Activate FileActivation.xml - as seen below…

Browse to your Desktop and double-click on file: FileActivation

You will see this show, meaning success:

 

Step 10:

Click on “Start”.

On next window, choose “No”, as seen below…

Browse to your Desktop, and double-click on file: FileActivation

 

Step 11:

Software will now register and launch automatically.

When it prompts you to update the software from internet, choose NO, as seen below…

DO NOT update the software from
internet, else you’ll brake the license and it’ll be nearly impossible
to reinstall it again. In this case, Total Car Diagnostics won’t be
refunding, because you have been warned.

All updates will be emailed to customers including how-to-update instructions.

 

Now let’s test that it’s working…

 

Step 12:

Click on: Settings > Hardware setup

 

Step 13:

Make sure your AutoCom is connected to laptop AND car. Turn on car ignition. Click on “Test”.

It should successfully detect your device and show something like this…

 

If it prompts that Firmware is out of
date, then click on “Update” button and wait 10 minutes for AutoCom unit
to update. Don’t disconnect it while it’s updating.

When done, you’re ready to start scanning your vehicle(s).

 

 

Troubleshooting:

If Step 13 shows “Failed”, then your device was not detected. Here’s what to do…

Step 1:

Exit AutoCom. Disconnect USB cable from computer. Restart Windows.

Step 2:

Connect USB cable to computer (obviously other end should be
connected to AutoCom device), and go to Control Panel -> Device
Manager

Expand “Ports (COM & LPT)”.

If Windows is successfully seeing AutoCom, then it should show something like this:

If “VCI (Diagnostics Unit)” is not there, then plug USB cable into another USB port.’

Step 3:

Make sure AutoCom device is connected to laptop via USB cable and other cable to the car. Car ignition should be on.

Then try Test again via: Settings > Hardware setup