http://aprnorton.com/how-to-use-voip-and-network-quality-manager-to-monitor-your-voip-network/

If you use the VoIP monitor, then it will allow you to monitor your network with great ease and convenience. The VoIP monitoring tool will detect audio delays, find the network bandwidth, etc. If you want to use VoIP and Network Quality Manager to monitor your VoIP network, then you have come to the right place. I have mentioned some of the best methods by which you can do this task in no time.

Source:-How to Use VoIP and Network Quality Manager to Monitor Your VoIP Network

Install VoIP and Network Quality Manager

To do so, follow the steps listed below:

• Execute the Orion installer after downloading it.
• Choose the Lightweight Installation option.
• Select the folder where you wish to save the installed file.
• For this procedure, you need to press on the browse option.
• Press on the Next button.
• Ensure that the VoIP and Network Quality Manager menu is chosen by going to the Products webpage.
• Press on the Next button.
• You need to wait until the installer completes the running procedure.
• You have to accept the agreement on the screen.
• Press on the Next button.
• Now, the installer will download the important files which are for the VoIP and Network Manager menu.
• After completing the installation process, you will get the Configuration wizard on the screen automatically.
• Press on the Next button.
• You have to choose services.
• After that, press on the next option.
• It is located on the Service Settings webpage.
• After completing the configuration wizard, press on the Finish option.

Discover devices

• While exiting from the Configuration window, you will get the Orion Web Console menu.
• You need to enter the password which is registered with the administrator account.
• Click on the Enter button.
• After going through all the steps, go to the settings tab.
• Press on the Network Discovery option.
• Press on the Add a Discovery option.
• It will open the Network Sonar window.
• Now, you can discover the device by using the four options.
• Enter the IP addresses which you wish to monitor.
• After that, press on the Next button.
• Then, you need to go to the Agents webpage.
• You need to check the option mentioned on display.
• After that, press on the Next button.
• Visit the Virtualization webpage.
• On that webpage, you can discover the VMware ESX or vCenter hosts on the network.
• After that, press on the Add Credential menu.
• Offer the necessary details.
• Start saving the details you have entered.
• Press on the Next button.
• By going to the SNMP webpage, in case you use the device with SNMPv3 strings, press on the Add New Credential option.
• After doing all these steps, you need to press on the Next button.
• To monitor settings pane, skip the ‘Manually set up monitoring after devices are discovered option.
• Press on the Next button,
• Enter the title on the Discovery Settings pane.
• In case you want to scan two times, then start changing the Frequency on your Discovery Scheduling webpage.

Add discovered devices

• Choose the devices which you wish to import.
• After that, press on the Next button.
• By going to the Interface pane, ensure that the interface you wish to monitor is already chosen.
• After that, press on the Next button.
• Choose the Volume option.
• Go through the import summary.
• After that, press on the Import option.
• After completing the importing process, press on the Finish option.
• Click on the My Dashboard menu.

Rdx Tango is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at norton.com/setup .

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Oct 25th 2019 08:33. Viewed 389 times.

Share on APSense

Comments