how to update clone Digiprog 3 to V4.94 Digiprog 3 Mileage programmer
Digiprog 3 is the most popular odometer correction tool for automobile. Nowaddays, chinese clone digiprog 3 mileage programmer has updated to v4.94, adding more car models and other function. Are you considering if you need to purchase the latest v4.94 digiprog 3 or still use your old version? Luckily, vipprogrammer.com get a good news for you, you can update your old version digiprog 3 to v4.94 now. upgrade guide of chinese clone Digiprog 3 Mileage programmer
Digiprog3 V4.94 Update Note:
1. Make sure the power connect is ok and the power supply is enough and stable.
2. Donot enter standby mode, or the computer screen display as in protection state.
4. Operation Windows System must be Winxp sp3 32bit, close the antivirus and firewall software in advance.
5. Make sure the device serial number match with the sn of the
Digiprog Update file, and check if there are Digi1.bin and Digi2.bin in
the update file before start.
6. Make sure select the Digi1.bin file during update process.
How to update Digiprog3 V4.94 ?
1. Connect the USB cable to the computer, start your dp3, run Digiloader1.exe.
2. Choose the right port, select Digi1.bin, Click the button. If your
dp3 dose not enter blue screen,check your setting and restart from step
1.
3. In upgrading, it should be like this until over. Attention, it will be damaged if you remove it now.
4. Upgrade Over. Your dp3 should restart automatically.
Comments