How to Setup & Install Brother Printer Driver - Printer Help

by Printer Support Usa Get Instant Printer Support Service

It is very easy to install the Brother printer driver on your computer. You can do it by following the simple steps given in this article. These procedures allow Windows 10 to wirelessly install a Brother printer. Initialise your brother printer's wifi connection.

On Windows 10, add a Brother printer without using a CD. It was necessary to use a USB cable, wifi, and appropriate printer drivers without a CD. But first, set up your printer on Windows 10 by using the instructions below:

Install Brother Printer Driver via Device Manager

Assuming you have already downloaded the driver for your Brother printer, here is how to install it via Device Manager:

Press the Windows key + R, then type in "devmgmt.msc" and hit Enter. This will open Device Manager.
Find your Brother printer under the "Printers" section and double-click on it.
Click on the "Driver" tab, then click on "Update Driver".
Select "Browse my computer for driver software".
Navigate to the location of the Brother printer driver you downloaded earlier, then select it and click "OK".
Follow the remaining prompts to finish installing the driver for your Brother printer.

Steps to Install brother printer driver manually (Using USB)

brother printer drivers are available for both Windows and Macintosh operating systems.
If you have a Windows computer, you can download the driver from the Brother website. If you have a Macintosh, you can download the driver from the Apple website.
Once you have downloaded the driver, open it and follow the instructions on-screen to install it.
After the driver is installed, connect your Brother printer to your computer using a USB cable.
Turn on your Brother printer and wait for it to initialise.
When prompted, select "USB" as the connection type and follow the instructions on-screen to complete the setup process.

To begin with, turn on your brother's printer. Press the button on the control panel. Tap the settings icon on the screen. Click wireless setup next. Enable the wifi option there. After that, briefly push the wifi button.

The printer will start looking for open wifi networks. An available wifi network list will show up. Click the name of your wifi network, then type your password. The Brother printer has a wifi connection.

Hopefully one of these solutions will fix your Install Brother Printer Driver issue. If you need more help then please contact Printer Support USA number +1 8669184391. For more help visit our website https://www.printsupportusa.com/