How To Reset Your Brother Printer to Default Factory Settings?

Brother printers are one of the reliable and efficient working printers available in the market. But sometimes you face issues with the printer like printer showing offline or it is not able to recognize the ink in the printer. Another cause can be disconnection between devices. You can try some the common troubleshooting ways to resolve the error but if that does not fix the problem. You should know the process of Brother printer how to reset. First, let’s have a look at some of the common troubleshooting ways to resolve printer errors. Check for any new updates on your software. You can check if the printer is working on any other device and if it is working there. Keep the printer on and cur its power cable. If there are any other cables attached to the printer remove them too. Press and hold the power button for 15-20 seconds. Make sure that your printer is directly connected to the main source and not through any other cables or device. When you reconnect the printer, it should turn on automatically. If not so, switch it back on manually.

If the above discussed methods does not help you fix the problem with your printer. Here’s how to reset the printer back to default settings. Follow the steps mentioned below.

Steps to reset Brother printer:

·        Keep the ink cartridges and other parts of the printer installed.

·        Turn off the printer.

·        Unplug the wires of the printer.

·        Wait for a minute and then plug the printer back in the electric socket.

·        While you switch on the printer, press the resume button till you see the light on the printer turned on.

·        This will bring the printer back to default settings.

The steps of resetting a printer remains the but differs a bit depending upon the model of the printer you are using. There is more that one way you can reset the printer. Let’s see the steps for Brother printer MFC L2710DW reset. Follow the steps mentioned below.

How to reset Brother printer?

·        Go to the printer panel by clicking on the dashboard of the printer screen.

·        Click on the set up option.

·        Then, select the printer maintenance.

·        Go to the restore option and select restore factory default from there.

·        You will see a text message on the printer saying factory defaults will be restored.

·        Lastly, select the restore option to complete the process.

The above mentioned process will erase all the current configuration of your printer and bring it back to default settings. During the process it will also eliminate any bugs or error. You will require to establish the connection between your printer and devices again. It is important that you do so and make a test print to see if the printer is working correctly and making proper prints. If you still find any trouble making print, you can go through the other troubleshooting ways. There should be enough ink in the printer. Contact the technical experts for a guided solution if you still face any error.