How To Repair Lexmark Printer At Low Costs?

From time to time, Lexmark printers have errors and these problems including not printing at all, unpredictable printing, inappropriate colors, and having been missing lines. Lexmark printers are no exception, if you face such type of errors, there are easy technical steps that you can do by yourself and save time and efforts and money of going to a service center or repair center. You should be more careful that you do not damage the warranty seals on your Lexmark printer.

Instructions:-

Step1:- Before doing something, you need to unplug the printer firstly. Then check connections carefully and connectors themselves. The factors that you need to check are: - USB cables and USB ports, AC cable and wall outlet. Next step is that, you need to open the cover of the printer and check of jammed papers inside. If there is a jammed paper, you should be more careful in pulling it out. If you have any type of technical difficulty, you should call at toll free Lexmark Printer Support Number 1-800-956-0247 for instant help.

Step2:- Secondly, Check out ink cartridges. Never pull out them instantly. Normally, there is a plastic cover above them. Check if the directions of the cartridges are the right and pull them out and visually inspect them if they are acceptable. You need to bring cartridges back into the place and never forget to lock the plastic cover. If you have any kind of trouble, you must call Lexmark Printer Help Support team for instant responses.

Step3:-Power on Lexmark printer but do not connect it until now the computer try to give a test print and see if it works. If there is a LCD panel in your printing device, check if this displays an error message.

Step4:- You need to shut down your system and wait for few seconds before beginning it again. And you need to wait for your computer to reset properly. You try to print the document again.

Step5:- You need to go to the control panel again and check the printers and conveys icon. Upon clicking, you will get a list of your available printers. If Lexmark printer is not found among them, you click to add the printer icon and follow the steps to add your printer.

Step6:-Finally, you have installed printer software successfully; there will be a button of Lexmark printer your desktop. Make double click on it and try to print a test page again. Now, your Lexmark printer must be working properly. If you have any error, you should call at Lexmark Printer Technical Support Number for instantaneous responses.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Dec 11th 2017 03:22. Viewed 298 times.

Share on APSense

Comments