How to Remove and Install Control Valve for New Holland T6030 Tractor
by Dave Jack Auto Car Repair KnowledgeHere is the instruction show you guide on how to remove and install control valve for New Holland T6030 Range Command Tractor.
Related Contents:
2022 New Holland Electronic Service Tools 9.6 9.2 CNH EST Software Free Download
New Holland Agricultural & Construction Parts+Service Manual Free Download
Remove Control Valve
1.Lower hydraulic links and thoroughly clean remote valve stack.
To aid reassembly draw a diagonal line across the valve stack.
NOTE:
Individual remote valve assemblies can be removed from the tractor
without the need to remove the complete valve stack. -To remove the
complete valve stack refer to PRIMARY HYDRAULIC POWER SYSTEM
Electro-hydraulic remote valve - Remove (A.10.C)
2.Identify and disconnect the connectors to each remote valve solenoid.
Disconnect hydraulic pipe work (1).
3.Remove the top plate
Remove the valve bolts (1).
Remove slices making sure to place them in their correct order on the workbench.
4.Remove EDC slice and Power beyond slice
Install Control Valve
1.Replace
the slices onto the top of the centre housing ensuring they are aligned
with the mark scratched onto the slices when they were removed.
Relocate the valve bolts and tighten in sequence to a torque 30 N.
Sponsor Ads
Created on May 8th 2023 19:44. Viewed 79 times.